[Thu May  2 15:54:20 2013] Detection parameters:
  Position = (256.4, 376.6) = 9 5 46.58 34 11 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.2 +/- 18.9
  Background counts = 105.0
  Rate = 0.006 +/- 0.0006

[Thu May  2 15:54:21 2013] Off-axis axis estimate = 6.44'
[Thu May  2 15:54:35 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Thu May  2 15:54:35 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Thu May  2 15:54:35 2013] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.643
[Thu May  2 15:54:35 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.65"
[Thu May  2 15:54:35 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May  2 15:54:35 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May  2 15:54:35 2013] Fit fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu May  2 15:54:36 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May  2 15:54:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  2 15:54:36 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  2 15:54:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  2 15:54:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:54:46 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.559990 pixels away
[Thu May  2 15:54:46 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:54:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:54:46 2013] Assessing source extent using major
[Thu May  2 15:54:46 2013] Source does appear to be extended
[Thu May  2 15:54:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 15:54:56 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Thu May  2 15:54:56 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Thu May  2 15:54:56 2013] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.643
[Thu May  2 15:54:56 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.65"
[Thu May  2 15:54:57 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May  2 15:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_src5.csv
[Thu May  2 15:54:57 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May  2 15:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_src5.csv
[Thu May  2 15:54:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:54:57 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May  2 15:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May  2 15:54:57 2013] fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  2 15:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May  2 15:54:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:55:05 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.809073 pixels away
[Thu May  2 15:55:05 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:55:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:55:05 2013] Assessing source extent using major
[Thu May  2 15:55:05 2013] Source does appear to be extended
[Thu May  2 15:55:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:14:30 2013] XMMSAS src. selection expression = ellipse(22257.354279, 32718.092712, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 16:14:30 2013] Not overwriting source region fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src.reg
[Thu May  2 16:14:30 2013] Extracting stamp from image fullrun_mos2_xmm0502760101_pi300-10000_cl_sm2.00.img.gz, (219, 339) - (294, 414)
[Thu May  2 16:14:30 2013] XMMSAS bgd. selection expression = annulus(22257.354279, 32718.092712, 1087.500000, 2175.000000, X, Y)
[Thu May  2 16:14:30 2013] Writing fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5.gif
[Thu May  2 16:14:30 2013] ../../xmm0502760101/products/events/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0502760101/products/events/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May  2 16:14:30 2013] Mean detx,y = (1914.79, 6021.35) 
[Thu May  2 16:14:30 2013] ../../xmm0502760101/products/images/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0502760101/products/images/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May  2 16:14:30 2013] ../../xmm0502760101/products/spectra/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0502760101/products/spectra/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May  2 16:14:30 2013] Setting source spectrum file to fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  2 16:14:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  2 16:14:30 2013] ../../xmm0502760101/products/lightcurves/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0502760101/products/lightcurves/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May  2 16:14:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 16:14:32 2013] rmf not generated due to insufficient counts
[Thu May  2 16:14:32 2013] fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Thu May  2 16:15:30 2013] Updating aperture counts using extracted products
[Thu May  2 16:15:30 2013] Total counts from fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 265.00
[Thu May  2 16:15:30 2013] Total counts from fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 1654.00
[Thu May  2 16:15:30 2013] Got source and background scale factors 1132200.000000, 9551295.000000
[Thu May  2 16:15:30 2013] User source parameters:
  Position = (256.4, 376.6) = 9 5 46.58 34 11 56.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.9 +/- 17.3
  Background aperture counts = 196.1
  Rate = 0.002 +/- 0.0005

[Thu May  2 16:15:30 2013] Updating counts from extracted products
[Thu May  2 16:15:30 2013] Set source signif. to 68.94/14.00 = 4.92
[Thu May  2 16:15:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:15:32 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5.arf
[Thu May  2 16:15:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 16:15:32 2013] Updating source flux to 3.7e-14
[Thu May  2 16:15:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 16:15:40 2013] xmm0502760101/analysis//spectral/fullrun_mos2_xmm0502760101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete