[Thu May  2 15:54:20 2013] Detection parameters:
  Position = (334.9, 340.0) = 9 5 19.06 34 9 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.0 +/- 19.5
  Background counts = 129.4
  Rate = 0.002 +/- 0.0004

[Thu May  2 15:54:20 2013] Off-axis axis estimate = 4.01'
[Thu May  2 15:54:34 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Thu May  2 15:54:34 2013] Initial guess for spatial extent in simple fitting = 8.43"
[Thu May  2 15:54:34 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841
[Thu May  2 15:54:34 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.43"
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May  2 15:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src11.csv
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May  2 15:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src11.csv
[Thu May  2 15:54:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May  2 15:54:35 2013] Fit fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May  2 15:54:44 2013] Spatial fit model total counts = 559.729000, observed total counts = 560.000000
[Thu May  2 15:54:44 2013] Offset between fit and detection position for source 7 = 0.411049 pixels
[Thu May  2 15:54:44 2013] 378.834900 total counts/ 335.688000 bgd. counts: snr = 2.354950
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.411049 pixels
  Position = (334.9, 339.6) = 9 5 19.06 34 9 12.8
  Extent = 4.0 (2.1-6.5)", rotation angle = 0
  Source counts = 43.1 +/- 19.5
  Background counts = 335.7
  Rate = 0.001 +/- 0.0005
[Thu May  2 15:54:44 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:54:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:54:44 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:54:44 2013] Source does appear to be extended
[Thu May  2 15:54:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 15:54:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 15:54:56 2013] Initial guess for spatial extent in simple fitting = 4.03"
[Thu May  2 15:54:56 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.104
[Thu May  2 15:54:56 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 4.03"
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src11.ximg exists
[Thu May  2 15:54:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src11.csv
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May  2 15:54:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src11.csv
[Thu May  2 15:54:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May  2 15:54:56 2013] Fit fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May  2 15:55:03 2013] Warning, spatial fit 11 centroid is now closest to src. 14
[Thu May  2 15:55:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:55:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:55:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:55:03 2013] Source does appear to be extended
[Thu May  2 15:55:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:14:28 2013] XMMSAS src. selection expression = ellipse(29087.756640, 29499.201600, 242.036407, 242.036407, 0.000000, X, Y)
[Thu May  2 16:14:28 2013] Not overwriting source region fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src.reg
[Thu May  2 16:14:28 2013] Extracting stamp from image fullrun_mos1_xmm0502760101_pi300-10000_cl_sm2.00.img.gz, (321, 326) - (349, 354)
[Thu May  2 16:14:28 2013] XMMSAS bgd. selection expression = annulus(29087.756640, 29499.201600, 403.394012, 806.788023, X, Y) && !ellipse(29677.121400, 29647.339000, 355.518410, 355.518410, 0.000000, X, Y)
[Thu May  2 16:14:28 2013] Writing fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7.gif
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/events/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0502760101/products/events/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Thu May  2 16:14:29 2013] Mean detx,y = (643.55, 2955.55) 
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/images/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0502760101/products/images/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/spectra/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0502760101/products/spectra/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Thu May  2 16:14:29 2013] Setting source spectrum file to fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May  2 16:14:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/lightcurves/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0502760101/products/lightcurves/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Thu May  2 16:14:30 2013] Not generating rmf since there are only 43 counts
[Thu May  2 16:14:30 2013] rmf not generated due to insufficient counts
[Thu May  2 16:14:30 2013] fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Thu May  2 16:15:28 2013] Updating aperture counts using extracted products
[Thu May  2 16:15:28 2013] Total counts from fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 82.00
[Thu May  2 16:15:28 2013] Total counts from fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 227.00
[Thu May  2 16:15:28 2013] Got source and background scale factors 185600.000000, 1262400.000000
[Thu May  2 16:15:29 2013] User source parameters:
  Position = (334.9, 339.6) = 9 5 19.06 34 9 12.8
  Extent = 4.0 (2.1-6.5)", rotation angle = 0
  Source aperture counts = 48.6 +/- 10.1
  Background aperture counts = 33.4
  Rate = 0.001 +/- 0.0003

[Thu May  2 16:15:29 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:15:29 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7.arf
[Thu May  2 16:15:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 16:15:29 2013] Updating source flux to 1.6e-14
[Thu May  2 16:15:34 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 16:15:38 2013] xmm0502760101/analysis//spectral/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete