[Thu May  2 15:54:20 2013] Detection parameters:
  Position = (129.6, 402.3) = 9 6 31.07 34 13 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 15.0
  Background counts = 63.3
  Rate = 0.001 +/- 0.0003

[Thu May  2 15:54:20 2013] Off-axis axis estimate = 14.38'
[Thu May  2 15:54:34 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Thu May  2 15:54:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 15:54:34 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Thu May  2 15:54:34 2013] source mask rpix=3.1, npix_max = 52, mask sum = 40, frac = 0.759
[Thu May  2 15:54:34 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.62"
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src13.ximg exists
[Thu May  2 15:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src13.csv
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May  2 15:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src13.csv
[Thu May  2 15:54:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May  2 15:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu May  2 15:54:35 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May  2 15:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu May  2 15:54:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502760101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:54:44 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.638346 pixels away
[Thu May  2 15:54:44 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:54:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:54:44 2013] Assessing source extent using major
[Thu May  2 15:54:44 2013] Source does appear to be extended
[Thu May  2 15:54:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 15:54:56 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Thu May  2 15:54:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 15:54:56 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Thu May  2 15:54:56 2013] source mask rpix=3.1, npix_max = 52, mask sum = 40, frac = 0.759
[Thu May  2 15:54:56 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.62"
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src13.ximg exists
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu May  2 15:54:56 2013] Fit fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_src13 appears to have run properly
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu May  2 15:54:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu May  2 15:54:56 2013] fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May  2 15:54:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu May  2 15:54:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502760101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:55:03 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.737535 pixels away
[Thu May  2 15:55:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:55:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:55:03 2013] Assessing source extent using major
[Thu May  2 15:55:03 2013] Source does appear to be extended
[Thu May  2 15:55:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:14:28 2013] XMMSAS src. selection expression = ellipse(11222.737900, 34955.700958, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 16:14:28 2013] Not overwriting source region fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src.reg
[Thu May  2 16:14:28 2013] Extracting stamp from image fullrun_mos1_xmm0502760101_pi300-10000_cl_sm2.00.img.gz, (92, 365) - (167, 440)
[Thu May  2 16:14:28 2013] XMMSAS bgd. selection expression = annulus(11222.737900, 34955.700958, 1087.500000, 2175.000000, X, Y)
[Thu May  2 16:14:28 2013] Writing fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5.gif
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/events/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0502760101/products/events/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May  2 16:14:29 2013] Mean detx,y = (12545.26, -11183.32) 
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/images/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0502760101/products/images/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/spectra/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0502760101/products/spectra/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May  2 16:14:29 2013] Setting source spectrum file to fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  2 16:14:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  2 16:14:29 2013] ../../xmm0502760101/products/lightcurves/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0502760101/products/lightcurves/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May  2 16:14:30 2013] Not generating rmf since there are only 67 counts
[Thu May  2 16:14:30 2013] rmf not generated due to insufficient counts
[Thu May  2 16:14:30 2013] fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Thu May  2 16:15:29 2013] Updating aperture counts using extracted products
[Thu May  2 16:15:29 2013] Total counts from fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 103.00
[Thu May  2 16:15:29 2013] Total counts from fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 555.00
[Thu May  2 16:15:29 2013] Got source and background scale factors 875798.000000, 4739232.000000
[Thu May  2 16:15:29 2013] User source parameters:
  Position = (129.6, 402.3) = 9 6 31.07 34 13 46.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 0.4 +/- 11.2
  Background aperture counts = 102.6
  Rate = 1e-05 +/- 0.0003

[Thu May  2 16:15:29 2013] Updating counts from extracted products
[Thu May  2 16:15:29 2013] Set source signif. to 0.44/10.13 = 0.04
[Thu May  2 16:15:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:15:30 2013] Using photon index=1.80, rate=1.22e-05, arf fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5.arf
[Thu May  2 16:15:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 16:15:30 2013] Updating source flux to 5e-16
[Thu May  2 16:15:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 16:15:38 2013] xmm0502760101/analysis//spectral/fullrun_mos1_xmm0502760101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete