[Tue Feb 14 16:07:30 2012] Detection parameters:
  Position = (211.7, 402.1) = 7 20 54.46 -31 16 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.7 +/- 20.8
  Background counts = 27.1
  Rate = 0.01 +/- 0.0009

[Tue Feb 14 16:07:31 2012] Off-axis axis estimate = 9.80'
[Tue Feb 14 16:09:46 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 16:09:46 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Tue Feb 14 16:09:46 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Tue Feb 14 16:09:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.33"
[Tue Feb 14 18:36:16 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Feb 14 18:36:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 18:36:16 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Feb 14 18:36:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 18:36:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 18:36:17 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 14 18:36:17 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 14 18:36:17 2012] Fit fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Feb 14 19:47:49 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.891918 pixels away
[Tue Feb 14 19:47:49 2012] Source 5 is offset by -3.084186 and 1.917758 pixels which is larger than
2 X fitted extent = 1.348644 x 1.348644, not incorporating fit results
[Tue Feb 14 19:47:49 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 19:47:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 19:47:49 2012] Assessing source extent using major
[Tue Feb 14 19:47:49 2012] Source does appear to be extended
[Tue Feb 14 19:47:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 19:48:05 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 19:48:05 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Tue Feb 14 19:48:05 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Tue Feb 14 19:48:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.33"
[Tue Feb 14 22:19:21 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Feb 14 22:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 22:19:21 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Feb 14 22:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 22:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 22:19:22 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 14 22:19:22 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 14 22:19:22 2012] Fit fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 14 22:52:18 2012] Spatial fit model total counts = 842.900000, observed total counts = 845.000000
[Tue Feb 14 22:52:18 2012] Offset between fit and detection position for source 5 = 6.645633 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 6.645633 pixels
  Position = (215.3, 396.5) = 7 20 53.26 -31 16 58.9
  Extent = 21.3 (19.2-22.7)", rotation angle = 0
  Source counts = 841.8 +/- 29.0
  Background counts = 0.0
  Rate = 0.04 +/- 0.001
[Tue Feb 14 22:52:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 22:52:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 22:52:18 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 22:52:18 2012] Source does appear to be extended
[Tue Feb 14 22:52:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 22:52:18 2012] Source is confused with source 18
[Tue Feb 14 22:52:31 2012] XMMSAS src. selection expression = ellipse(18678.802000, 34448.002000, 1278.618037, 1278.618037, 0.000000, X, Y)
[Tue Feb 14 22:52:31 2012] Writing source region out to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src5_src.reg
[Tue Feb 14 22:52:31 2012] Extracting stamp from image fullrun_pn_xmm0502710301_pi300-10000_cl_sm2.00.img.gz, (142, 323) - (289, 470)
[Tue Feb 14 22:52:31 2012] XMMSAS bgd. selection expression = annulus(18678.802000, 34448.002000, 2131.030061, 4262.060123, X, Y) && !ellipse(19739.246200, 32908.164000, 832.608024, 832.608024, 0.000000, X, Y) && !ellipse(17763.013611, 35693.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19347.372000, 33465.018000, 1604.816046, 1604.816046, 0.000000, X, Y) && !ellipse(20140.594000, 32203.086000, 1552.920045, 1552.920045, 0.000000, X, Y) && !ellipse(20715.098000, 31459.138000, 2580.056074, 2580.056074, 0.000000, X, Y) && !ellipse(20948.032000, 31102.552000, 1407.208040, 1407.208040, 0.000000, X, Y) && !ellipse(21606.450000, 30166.482000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(21897.454000, 29796.644000, 1430.904041, 1430.904041, 0.000000, X, Y) && !ellipse(21921.216000, 29747.270000, 1359.392039, 1359.392039, 0.000000, X, Y) && !ellipse(22165.552000, 29269.614000, 2867.600083, 2867.600083, 0.000000, X, Y)
[Tue Feb 14 22:52:31 2012] Writing fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src5.gif
[Tue Feb 14 22:58:05 2012] Mean detx,y = (87.25, 12594.79) 
[Tue Feb 14 22:58:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 22:59:02 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 22:59:02 2012] Setting source spectrum file to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 22:59:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Feb 15 02:51:26 2012] Updating aperture counts using extracted products
[Wed Feb 15 02:51:26 2012] Error reading totcts from fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Feb 15 02:51:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:27 2012] Using photon index=1.80, rate=0.0365, arf fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src5.arf
[Wed Feb 15 02:51:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:27 2012] Updating source flux to 1.7e-13
[Wed Feb 15 02:52:07 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Wed Feb 15 02:52:07 2012] Flag c found in src. 5 procflags, skipping spectral fitting