[Tue Feb 14 16:07:31 2012] Detection parameters:
  Position = (272.1, 313.1) = 7 20 33.97 -31 22 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.7 +/- 20.6
  Background counts = 34.3
  Rate = 0.01 +/- 0.001

[Tue Feb 14 16:07:31 2012] Off-axis axis estimate = 2.18'
[Tue Feb 14 16:09:46 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 16:09:46 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue Feb 14 16:09:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Tue Feb 14 16:09:46 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.52"
[Tue Feb 14 18:36:17 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src38.ximg exists
[Tue Feb 14 18:36:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src38.csv
[Tue Feb 14 18:36:17 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue Feb 14 18:36:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src38.csv
[Tue Feb 14 18:36:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 18:36:18 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue Feb 14 18:36:18 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue Feb 14 18:36:18 2012] Fit fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Tue Feb 14 19:47:49 2012] Warning, spatial fit 38 centroid is now closest to src. 36
[Tue Feb 14 19:47:49 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 19:47:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 19:47:49 2012] Assessing source extent using major
[Tue Feb 14 19:47:49 2012] Source does appear to be extended
[Tue Feb 14 19:47:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 19:47:49 2012] Source is confused with source 36
[Tue Feb 14 19:48:05 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 19:48:05 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue Feb 14 19:48:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Tue Feb 14 19:48:05 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.52"
[Tue Feb 14 22:19:21 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src31.ximg exists
[Tue Feb 14 22:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src31.csv
[Tue Feb 14 22:19:21 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Feb 14 22:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src31.csv
[Tue Feb 14 22:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 22:19:22 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Feb 14 22:19:22 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Feb 14 22:19:22 2012] Fit fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Tue Feb 14 22:52:18 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 47.001916 pixels away
[Tue Feb 14 22:52:18 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 17.218978 pixels away
[Tue Feb 14 22:52:18 2012] Warning, spatial fit 31 centroid is now closest to src. 36
[Tue Feb 14 22:52:18 2012] Spatial fit model total counts = 1149.620000, observed total counts = 1157.000000
[Tue Feb 14 22:52:18 2012] Offset between fit and detection position for source 38 = 2.280338 pixels
[Tue Feb 14 22:52:18 2012] Warning, changing simple spatial fit ID from 31 to 32
[Tue Feb 14 22:52:18 2012] 1121.543000 total counts/ 276.848000 bgd. counts: snr = 50.766734
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.280338 pixels
  Position = (273.1, 311.0) = 7 20 33.63 -31 23 10.9
  Extent = 20.4 (20.4-20.4)", rotation angle = 0
  Source counts = 844.7 +/- 33.5
  Background counts = 276.8
  Rate = 0.04 +/- 0.001
[Tue Feb 14 22:52:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 22:52:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 22:52:18 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 22:52:18 2012] Source does appear to be extended
[Tue Feb 14 22:52:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 22:52:32 2012] XMMSAS src. selection expression = ellipse(23712.816000, 27010.486000, 1224.174035, 1224.174035, 0.000000, X, Y)
[Tue Feb 14 22:52:32 2012] Writing source region out to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src38_src.reg
[Tue Feb 14 22:52:32 2012] Extracting stamp from image fullrun_pn_xmm0502710301_pi300-10000_cl_sm2.00.img.gz, (203, 241) - (343, 381)
[Tue Feb 14 22:52:32 2012] XMMSAS bgd. selection expression = annulus(23712.816000, 27010.486000, 2040.290059, 4080.580117, X, Y) && !ellipse(25938.723000, 23822.933000, 1440.835241, 1440.835241, 0.000000, X, Y) && !ellipse(20140.594000, 32203.086000, 1552.920045, 1552.920045, 0.000000, X, Y) && !ellipse(20715.098000, 31459.138000, 2580.056074, 2580.056074, 0.000000, X, Y) && !ellipse(20948.032000, 31102.552000, 1407.208040, 1407.208040, 0.000000, X, Y) && !ellipse(21606.450000, 30166.482000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(21897.454000, 29796.644000, 1430.904041, 1430.904041, 0.000000, X, Y) && !ellipse(21921.216000, 29747.270000, 1359.392039, 1359.392039, 0.000000, X, Y) && !ellipse(22165.552000, 29269.614000, 2867.600083, 2867.600083, 0.000000, X, Y) && !ellipse(21163.297420, 28936.056600, 409.457612, 409.457612, 0.000000, X, Y) && !ellipse(26278.841400, 28241.161800, 490.054414, 490.054414, 0.000000, X, Y) && !ellipse(22996.898000, 28165.042000, 1234.104036, 1234.104036, 0.000000, X, Y) && !ellipse(23285.328000, 27650.038000, 1203.216035, 1203.216035, 0.000000, X, Y) && !ellipse(24520.884000, 27534.911440, 581.689617, 581.689617, 0.000000, X, Y) && !ellipse(24129.163260, 26439.895500, 1172.120034, 460.347236, 235.403712, X, Y) && !ellipse(24232.805000, 23100.506000, 1632.464047, 249.218407, 337.064000, X, Y) && !ellipse(26673.398132, 22943.456329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.072200, 21866.733600, 1315.832038, 1315.832038, 0.000000, X, Y)
[Tue Feb 14 22:52:32 2012] Writing fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src38.gif
[Tue Feb 14 23:35:02 2012] Mean detx,y = (117.42, 3546.82) 
[Tue Feb 14 23:35:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 23:36:11 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 23:36:11 2012] Setting source spectrum file to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Feb 14 23:36:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Feb 15 02:51:26 2012] Updating aperture counts using extracted products
[Wed Feb 15 02:51:26 2012] Error reading totcts from fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Feb 15 02:51:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:27 2012] Using photon index=1.80, rate=0.0366, arf fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src38.arf
[Wed Feb 15 02:51:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:27 2012] Updating source flux to 9.5e-14
[Wed Feb 15 02:52:07 2012] Flag c found in src. 38 procflags, skipping spectral fitting