[Tue Feb 14 16:07:30 2012] Detection parameters:
  Position = (298.8, 274.2) = 7 20 24.92 -31 25 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116084.2 +/- 400.3
  Background counts = 33.0
  Rate = 6 +/- 0.02

[Tue Feb 14 16:07:31 2012] Off-axis axis estimate = 1.76'
[Tue Feb 14 16:09:46 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 16:09:46 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Feb 14 16:09:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Tue Feb 14 16:09:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Feb 14 18:36:16 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 18:36:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 18:36:16 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 18:36:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 18:36:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 18:36:17 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 18:36:17 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 18:36:17 2012] Fit fullrun_pn_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 19:47:49 2012] Spatial fit model total counts = 103930.000000, observed total counts = 103928.000000
[Tue Feb 14 19:47:49 2012] Offset between fit and detection position for source 1 = 0.191744 pixels
[Tue Feb 14 19:47:49 2012] 103870.700000 total counts/ 19270.700000 bgd. counts: snr = 609.426897
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.191744 pixels
  Position = (298.7, 274.4) = 7 20 24.94 -31 25 50.3
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 84600.0 +/- 322.3
  Background counts = 19270.7
  Rate = 4 +/- 0.01
[Tue Feb 14 19:47:49 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 19:47:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 19:47:49 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 19:47:49 2012] Source does appear to be extended
[Tue Feb 14 19:47:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 19:48:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 19:48:05 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Tue Feb 14 19:48:05 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.849
[Tue Feb 14 19:48:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Tue Feb 14 22:19:21 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 22:19:21 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 22:19:21 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 22:19:21 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 22:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 22:19:22 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 22:19:22 2012] fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 22:19:22 2012] Fit fullrun_pn_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 22:52:18 2012] Spatial fit model total counts = 103931.000000, observed total counts = 103928.000000
[Tue Feb 14 22:52:18 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Tue Feb 14 22:52:18 2012] 103871.000000 total counts/ 19271.000000 bgd. counts: snr = 609.422153
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (298.7, 274.4) = 7 20 24.94 -31 25 50.3
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 84600.0 +/- 322.3
  Background counts = 19271.0
  Rate = 4 +/- 0.01
[Tue Feb 14 22:52:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 22:52:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 22:52:18 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 22:52:18 2012] Source does appear to be extended
[Tue Feb 14 22:52:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 22:52:31 2012] Counts = 84600.000000, rescaling region sizes by 3.000000
[Tue Feb 14 22:52:31 2012] XMMSAS src. selection expression = ellipse(25938.723000, 23822.933000, 1080.626431, 1080.626431, 0.000000, X, Y)
[Tue Feb 14 22:52:31 2012] Writing source region out to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 14 22:52:31 2012] Extracting stamp from image fullrun_pn_xmm0502710301_pi300-10000_cl_sm2.00.img.gz, (237, 212) - (361, 336)
[Tue Feb 14 22:52:31 2012] XMMSAS bgd. selection expression = annulus(25938.723000, 23822.933000, 5403.132155, 10806.264311, X, Y) && !ellipse(29520.150480, 26952.107800, 419.556012, 419.556012, 0.000000, X, Y) && !ellipse(18678.802000, 34448.002000, 1704.824049, 1704.824049, 0.000000, X, Y) && !ellipse(19739.246200, 32908.164000, 832.608024, 832.608024, 0.000000, X, Y) && !ellipse(30617.506000, 27865.376800, 393.444011, 393.444011, 0.000000, X, Y) && !ellipse(17410.211200, 24369.574000, 374.976811, 374.976811, 0.000000, X, Y) && !ellipse(34813.943634, 22514.990356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19901.352966, 17192.232758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19347.372000, 33465.018000, 1604.816046, 1604.816046, 0.000000, X, Y) && !ellipse(20140.594000, 32203.086000, 1552.920045, 1552.920045, 0.000000, X, Y) && !ellipse(20715.098000, 31459.138000, 2580.056074, 2580.056074, 0.000000, X, Y) && !ellipse(20948.032000, 31102.552000, 1407.208040, 1407.208040, 0.000000, X, Y) && !ellipse(21606.450000, 30166.482000, 1448.904042, 1448.904042, 0.000000, X, Y) && !ellipse(21897.454000, 29796.644000, 1430.904041, 1430.904041, 0.000000, X, Y) && !ellipse(21921.216000, 29747.270000, 1359.392039, 1359.392039, 0.000000, X, Y) && !ellipse(32457.956400, 29067.974600, 315.735209, 315.735209, 0.000000, X, Y) && !ellipse(22165.552000, 29269.614000, 2867.600083, 2867.600083, 0.000000, X, Y) && !ellipse(21163.297420, 28936.056600, 409.457612, 409.457612, 0.000000, X, Y) && !ellipse(26278.841400, 28241.161800, 490.054414, 490.054414, 0.000000, X, Y) && !ellipse(22996.898000, 28165.042000, 1234.104036, 1234.104036, 0.000000, X, Y) && !ellipse(23285.328000, 27650.038000, 1203.216035, 1203.216035, 0.000000, X, Y) && !ellipse(24520.884000, 27534.911440, 581.689617, 581.689617, 0.000000, X, Y) && !ellipse(23712.816000, 27010.486000, 1632.232047, 1632.232047, 0.000000, X, Y) && !ellipse(28784.186249, 26896.505554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24129.163260, 26439.895500, 1172.120034, 460.347236, 235.403712, X, Y) && !ellipse(24232.805000, 23100.506000, 1632.464047, 249.218407, 337.064000, X, Y) && !ellipse(28955.058624, 12788.824188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.398132, 22943.456329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.072200, 21866.733600, 1315.832038, 1315.832038, 0.000000, X, Y) && !ellipse(16292.373800, 21794.756200, 435.335213, 435.335213, 0.000000, X, Y) && !ellipse(25704.428000, 21583.168000, 1280.664037, 1280.664037, 0.000000, X, Y) && !ellipse(21490.955000, 20593.626800, 666.164819, 666.164819, 0.000000, X, Y) && !ellipse(27886.751831, 16664.781982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30991.240417, 16201.172714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17526.508800, 14446.617800, 454.996813, 454.996813, 0.000000, X, Y) && !ellipse(24808.117920, 15744.789108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18096.324661, 15431.426620, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 22:52:31 2012] Writing fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1.gif
[Tue Feb 14 22:52:52 2012] Mean detx,y = (106.05, -255.19) 
[Tue Feb 14 22:52:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 22:56:10 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 22:56:10 2012] Setting source spectrum file to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 22:56:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 15 02:51:26 2012] Updating aperture counts using extracted products
[Wed Feb 15 02:51:26 2012] Error reading totcts from fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 15 02:51:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:27 2012] Using photon index=1.80, rate=3.67, arf fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1.arf
[Wed Feb 15 02:51:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:27 2012] Updating source flux to 8.3e-12
[Wed Feb 15 02:54:44 2012] Reading fit data from xmm0502710301/analysis//spectral/fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Feb 15 02:54:44 2012] Spectral fit parameter nH value = 2.34616e+21
[Wed Feb 15 02:54:44 2012] Spectral fit parameter PhoIndex value = 7.2941
[Wed Feb 15 02:54:44 2012] Failed to get F(0.3-8.0) from xmm0502710301/analysis//spectral/fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Feb 15 02:54:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:54:44 2012] Using Nh = 2.3e+21, photon index=7.29, rate=3.67, arf fullrun_pn_xmm0502710301_pi300-10000_pass1_cl_src1.arf
[Wed Feb 15 02:54:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:54:44 2012] Updating source flux to 3.8e-12