[Tue Feb 14 16:08:13 2012] Detection parameters:
  Position = (340.3, 310.3) = 7 20 10.81 -31 23 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.4 +/- 19.1
  Background counts = 10.7
  Rate = 0.01 +/- 0.0009

[Tue Feb 14 16:08:13 2012] Off-axis axis estimate = 3.15'
[Tue Feb 14 18:59:28 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 18:59:28 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Tue Feb 14 18:59:28 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.141
[Tue Feb 14 18:59:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.01"
[Tue Feb 14 19:47:35 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Feb 14 19:47:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src2.csv
[Tue Feb 14 19:47:35 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Feb 14 19:47:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src2.csv
[Tue Feb 14 19:47:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 19:47:36 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Feb 14 19:47:36 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Feb 14 19:47:36 2012] Fit fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Feb 14 19:47:56 2012] Spatial fit model total counts = 315.916000, observed total counts = 315.000000
[Tue Feb 14 19:47:56 2012] Offset between fit and detection position for source 5 = 0.218640 pixels
[Tue Feb 14 19:47:56 2012] 315.077000 total counts/ 168.820000 bgd. counts: snr = 11.256535
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.218640 pixels
  Position = (340.1, 310.5) = 7 20 10.86 -31 23 13.3
  Extent = 4.4 (3.5-5.1)", rotation angle = 0
  Source counts = 146.3 +/- 17.8
  Background counts = 168.8
  Rate = 0.006 +/- 0.0007
[Tue Feb 14 19:47:56 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 19:47:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 19:47:56 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 19:47:56 2012] Source does appear to be extended
[Tue Feb 14 19:47:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 22:32:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 22:32:49 2012] Initial guess for spatial extent in simple fitting = 4.43"
[Tue Feb 14 22:32:49 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.977
[Tue Feb 14 22:32:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.43"
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Feb 14 22:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src2.csv
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Feb 14 22:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src2.csv
[Tue Feb 14 22:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Feb 14 22:52:07 2012] Fit fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Feb 14 22:52:23 2012] Spatial fit model total counts = 315.000000, observed total counts = 315.000000
[Tue Feb 14 22:52:23 2012] Offset between fit and detection position for source 5 = 0.002756 pixels
[Tue Feb 14 22:52:23 2012] 314.172000 total counts/ 170.855000 bgd. counts: snr = 10.964375
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.002756 pixels
  Position = (340.1, 310.5) = 7 20 10.86 -31 23 13.3
  Extent = 4.3 (3.5-5.1)", rotation angle = 0
  Source counts = 143.3 +/- 17.7
  Background counts = 170.9
  Rate = 0.006 +/- 0.0007
[Tue Feb 14 22:52:23 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 22:52:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 22:52:23 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 22:52:23 2012] Source does appear to be extended
[Tue Feb 14 22:52:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 02:32:54 2012] XMMSAS src. selection expression = ellipse(29543.787380, 26961.755400, 257.945407, 257.945407, 0.000000, X, Y)
[Wed Feb 15 02:32:54 2012] Writing source region out to fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src5_src.reg
[Wed Feb 15 02:32:54 2012] Extracting stamp from image fullrun_mos2_xmm0502710301_pi300-10000_cl_sm2.00.img.gz, (325, 296) - (355, 325)
[Wed Feb 15 02:32:54 2012] XMMSAS bgd. selection expression = annulus(29543.787380, 26961.755400, 429.909012, 859.818025, X, Y) && !ellipse(30623.788800, 27887.980000, 370.054411, 370.054411, 0.000000, X, Y)
[Wed Feb 15 02:32:54 2012] Writing fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src5.gif
[Wed Feb 15 02:36:47 2012] Mean detx,y = (4784.80, -480.17) 
[Wed Feb 15 02:36:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 02:36:55 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 02:36:55 2012] Setting source spectrum file to fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Feb 15 02:36:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Feb 15 02:51:27 2012] Updating aperture counts using extracted products
[Wed Feb 15 02:51:27 2012] Error reading totcts from fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Feb 15 02:51:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:28 2012] Using photon index=1.80, rate=0.00582, arf fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src5.arf
[Wed Feb 15 02:51:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:28 2012] Updating source flux to 9.3e-14