[Tue Feb 14 16:08:12 2012] Detection parameters:
  Position = (298.7, 274.3) = 7 20 24.93 -31 25 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23225.1 +/- 179.1
  Background counts = 12.5
  Rate = 1 +/- 0.008

[Tue Feb 14 16:08:13 2012] Off-axis axis estimate = 1.75'
[Tue Feb 14 18:59:28 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 18:59:28 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Feb 14 18:59:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Tue Feb 14 18:59:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Feb 14 19:47:35 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 19:47:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 19:47:35 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 19:47:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 19:47:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 19:47:36 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 19:47:36 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 19:47:36 2012] Fit fullrun_mos2_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 19:47:56 2012] Spatial fit model total counts = 21292.100000, observed total counts = 21309.000000
[Tue Feb 14 19:47:56 2012] Offset between fit and detection position for source 1 = 0.209127 pixels
[Tue Feb 14 19:47:56 2012] 21423.720000 total counts/ 4561.820000 bgd. counts: snr = 249.653372
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.209127 pixels
  Position = (298.8, 274.5) = 7 20 24.92 -31 25 50.0
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 16861.9 +/- 146.4
  Background counts = 4561.8
  Rate = 0.7 +/- 0.006
[Tue Feb 14 19:47:56 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 19:47:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 19:47:56 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 19:47:56 2012] Source does appear to be extended
[Tue Feb 14 19:47:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 22:32:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 22:32:49 2012] Initial guess for spatial extent in simple fitting = 5.75"
[Tue Feb 14 22:32:49 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.904
[Tue Feb 14 22:32:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.75"
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 22:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 22:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 22:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 22:52:07 2012] fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 22:52:07 2012] Fit fullrun_mos2_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 22:52:23 2012] Spatial fit model total counts = 21314.600000, observed total counts = 21309.000000
[Tue Feb 14 22:52:23 2012] Offset between fit and detection position for source 1 = 0.003442 pixels
[Tue Feb 14 22:52:23 2012] 21445.830000 total counts/ 4569.630000 bgd. counts: snr = 249.651480
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003442 pixels
  Position = (298.8, 274.5) = 7 20 24.92 -31 25 50.0
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 16876.2 +/- 146.4
  Background counts = 4569.6
  Rate = 0.7 +/- 0.006
[Tue Feb 14 22:52:23 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 22:52:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 22:52:23 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 22:52:23 2012] Source does appear to be extended
[Tue Feb 14 22:52:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 02:32:54 2012] Counts = 16876.200000, rescaling region sizes by 3.000000
[Wed Feb 15 02:32:54 2012] XMMSAS src. selection expression = ellipse(25944.395600, 23829.862000, 1034.726430, 1034.726430, 0.000000, X, Y)
[Wed Feb 15 02:32:54 2012] Writing source region out to fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1_src.reg
[Wed Feb 15 02:32:54 2012] Extracting stamp from image fullrun_mos2_xmm0502710301_pi300-10000_cl_sm2.00.img.gz, (239, 215) - (358, 334)
[Wed Feb 15 02:32:54 2012] XMMSAS bgd. selection expression = annulus(25944.395600, 23829.862000, 5173.632149, 10347.264298, X, Y) && !ellipse(29543.787380, 26961.755400, 343.927210, 343.927210, 0.000000, X, Y) && !ellipse(30623.788800, 27887.980000, 370.054411, 370.054411, 0.000000, X, Y) && !ellipse(17425.027200, 24329.588600, 342.835210, 342.835210, 0.000000, X, Y) && !ellipse(19915.805618, 17272.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25552.184570, 22821.163025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32452.957800, 29105.857200, 499.622414, 499.622414, 0.000000, X, Y) && !ellipse(18068.566330, 15344.885941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.023660, 16674.340000, 590.209617, 590.209617, 0.000000, X, Y) && !ellipse(24716.843323, 24368.561890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.911865, 21591.645508, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 15 02:32:54 2012] Writing fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1.gif
[Wed Feb 15 02:32:57 2012] Mean detx,y = (64.05, 113.49) 
[Wed Feb 15 02:32:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 02:36:44 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 02:36:44 2012] Setting source spectrum file to fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 15 02:36:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 15 02:51:27 2012] Updating aperture counts using extracted products
[Wed Feb 15 02:51:27 2012] Error reading totcts from fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 15 02:51:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:28 2012] Using photon index=1.80, rate=0.685, arf fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1.arf
[Wed Feb 15 02:51:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:28 2012] Updating source flux to 6.8e-12
[Wed Feb 15 02:52:07 2012] Reading fit data from xmm0502710301/analysis//spectral/fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Feb 15 02:52:07 2012] Spectral fit parameter nH value = 1.99933e+21
[Wed Feb 15 02:52:07 2012] Spectral fit parameter PhoIndex value = 7.28409
[Wed Feb 15 02:52:07 2012] Failed to get F(0.3-8.0) from xmm0502710301/analysis//spectral/fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Feb 15 02:52:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:52:07 2012] Using Nh = 2e+21, photon index=7.28, rate=0.685, arf fullrun_mos2_xmm0502710301_pi300-10000_pass1_cl_src1.arf
[Wed Feb 15 02:52:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:52:07 2012] Updating source flux to 4.4e-12