[Tue Feb 14 16:07:50 2012] Detection parameters:
  Position = (298.7, 274.8) = 7 20 24.96 -31 25 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24099.1 +/- 185.1
  Background counts = 12.3
  Rate = 1 +/- 0.008

[Tue Feb 14 16:07:50 2012] Off-axis axis estimate = 1.72'
[Tue Feb 14 18:36:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 18:36:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Feb 14 18:36:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Tue Feb 14 18:36:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Feb 14 18:59:28 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 18:59:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 18:59:28 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 18:59:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 18:59:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 18:59:28 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 18:59:28 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 18:59:28 2012] Fit fullrun_mos1_xmm0502710301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 19:47:52 2012] Spatial fit model total counts = 21220.000000, observed total counts = 21220.000000
[Tue Feb 14 19:47:52 2012] Offset between fit and detection position for source 1 = 0.177665 pixels
[Tue Feb 14 19:47:52 2012] 21215.810000 total counts/ 4617.210000 bgd. counts: snr = 244.276476
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.177665 pixels
  Position = (298.7, 274.6) = 7 20 24.95 -31 25 49.4
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 16598.6 +/- 145.7
  Background counts = 4617.2
  Rate = 0.7 +/- 0.006
[Tue Feb 14 19:47:52 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 19:47:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 19:47:52 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 19:47:52 2012] Source does appear to be extended
[Tue Feb 14 19:47:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 19:47:52 2012] Source is confused with source 13
[Tue Feb 14 22:19:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 22:19:22 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Tue Feb 14 22:19:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.688
[Tue Feb 14 22:19:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.69"
[Tue Feb 14 22:32:49 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 22:32:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 22:32:49 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 22:32:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 22:32:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 22:32:49 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 22:32:49 2012] fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 22:32:49 2012] Fit fullrun_mos1_xmm0502710301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 22:52:20 2012] Spatial fit model total counts = 21207.300000, observed total counts = 21233.000000
[Tue Feb 14 22:52:20 2012] Offset between fit and detection position for source 1 = 0.014241 pixels
[Tue Feb 14 22:52:20 2012] 21294.370000 total counts/ 4653.170000 bgd. counts: snr = 243.955257
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014241 pixels
  Position = (298.7, 274.6) = 7 20 24.95 -31 25 49.5
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 16641.2 +/- 145.9
  Background counts = 4653.2
  Rate = 0.7 +/- 0.006
[Tue Feb 14 22:52:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 22:52:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 22:52:20 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 22:52:20 2012] Source does appear to be extended
[Tue Feb 14 22:52:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 02:08:35 2012] Counts = 16641.200000, rescaling region sizes by 3.000000
[Wed Feb 15 02:08:35 2012] XMMSAS src. selection expression = ellipse(25935.532200, 23840.350400, 1031.383830, 1031.383830, 0.000000, X, Y)
[Wed Feb 15 02:08:35 2012] Writing source region out to fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1_src.reg
[Wed Feb 15 02:08:35 2012] Extracting stamp from image fullrun_mos1_xmm0502710301_pi300-10000_cl_sm2.00.img.gz, (239, 215) - (358, 334)
[Wed Feb 15 02:08:35 2012] XMMSAS bgd. selection expression = annulus(25935.532200, 23840.350400, 5156.919148, 10313.838297, X, Y) && !ellipse(29537.476471, 26947.498047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30615.432200, 27864.832760, 355.281610, 355.281610, 0.000000, X, Y) && !ellipse(27885.140840, 16669.578000, 550.208816, 550.208816, 0.000000, X, Y) && !ellipse(31023.695496, 16213.586304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25969.537820, 24639.106000, 1070.274374, 1070.274374, 0.000000, X, Y)
[Wed Feb 15 02:08:35 2012] Writing fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1.gif
[Wed Feb 15 02:08:38 2012] Mean detx,y = (322.65, -217.14) 
[Wed Feb 15 02:08:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 02:12:46 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 02:12:46 2012] Setting source spectrum file to fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 15 02:12:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 15 02:51:27 2012] Updating aperture counts using extracted products
[Wed Feb 15 02:51:27 2012] Error reading totcts from fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 15 02:51:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:27 2012] Using photon index=1.80, rate=0.676, arf fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1.arf
[Wed Feb 15 02:51:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:27 2012] Updating source flux to 6e-12
[Wed Feb 15 02:51:29 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Feb 15 02:51:46 2012] Reading fit data from xmm0502710301/analysis//spectral/fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Feb 15 02:51:46 2012] Spectral fit parameter nH value = 1.88375e+21
[Wed Feb 15 02:51:46 2012] Spectral fit parameter PhoIndex value = 7.26649
[Wed Feb 15 02:51:46 2012] Failed to get F(0.3-8.0) from xmm0502710301/analysis//spectral/fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Feb 15 02:51:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 02:51:46 2012] Using Nh = 1.9e+21, photon index=7.27, rate=0.676, arf fullrun_mos1_xmm0502710301_pi300-10000_pass1_cl_src1.arf
[Wed Feb 15 02:51:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 02:51:46 2012] Updating source flux to 4e-12