[Mon Jul 23 10:26:06 2012] Detection parameters:
  Position = (301.3, 321.8) = 7 20 25.06 -31 25 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21926.4 +/- 178.7
  Background counts = 27.9
  Rate = 1 +/- 0.008

[Mon Jul 23 10:26:06 2012] Off-axis axis estimate = 1.71'
[Mon Jul 23 12:36:40 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 12:36:40 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jul 23 12:36:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Jul 23 12:36:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Jul 23 13:00:19 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 13:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 13:00:19 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 13:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 13:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:00:20 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 13:00:20 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 13:00:20 2012] Fit fullrun_mos1_xmm0502710201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 13:24:42 2012] Spatial fit model total counts = 18060.200000, observed total counts = 18094.000000
[Mon Jul 23 13:24:42 2012] Offset between fit and detection position for source 1 = 0.208774 pixels
[Mon Jul 23 13:24:42 2012] 18048.770000 total counts/ 3792.670000 bgd. counts: snr = 231.487852
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.208774 pixels
  Position = (301.1, 321.7) = 7 20 25.12 -31 25 51.1
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 14256.1 +/- 134.3
  Background counts = 3792.7
  Rate = 0.7 +/- 0.007
[Mon Jul 23 13:24:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:24:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:24:42 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:24:42 2012] Source does appear to be extended
[Mon Jul 23 13:24:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:06:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 16:06:33 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Mon Jul 23 16:06:33 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.201
[Mon Jul 23 16:06:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Mon Jul 23 16:21:51 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 16:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 16:21:51 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 16:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 16:21:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:21:51 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 16:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 16:21:51 2012] fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 16:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 16:21:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502710201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:45:25 2012] Spatial fit model total counts = 16179.200000, observed total counts = 18094.000000
[Mon Jul 23 16:45:25 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 16:45:25 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:45:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:45:25 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 16:45:25 2012] Source does appear to be extended
[Mon Jul 23 16:45:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 18:46:51 2012] Counts = 14256.100000, rescaling region sizes by 3.000000
[Mon Jul 23 18:46:51 2012] XMMSAS src. selection expression = ellipse(26144.710680, 27943.166800, 1037.412030, 1037.412030, 0.000000, X, Y)
[Mon Jul 23 18:46:51 2012] Writing source region out to fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 18:46:51 2012] Extracting stamp from image fullrun_mos1_xmm0502710201_pi300-10000_cl_sm2.00.img.gz, (241, 262) - (361, 381)
[Mon Jul 23 18:46:51 2012] XMMSAS bgd. selection expression = annulus(26144.710680, 27943.166800, 5187.060149, 10374.120299, X, Y) && !ellipse(29738.818800, 31067.876000, 355.805610, 355.805610, 0.000000, X, Y) && !ellipse(30839.659485, 32104.013641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26015.043793, 27033.258148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35033.555400, 26624.603800, 604.705617, 604.705617, 0.000000, X, Y) && !ellipse(17645.579010, 28491.089600, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 18:46:51 2012] Writing fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 18:46:55 2012] Mean detx,y = (311.78, -267.52) 
[Mon Jul 23 18:46:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 18:51:07 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 18:51:08 2012] Setting source spectrum file to fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 18:51:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 19:16:55 2012] Updating aperture counts using extracted products
[Mon Jul 23 19:16:55 2012] Error reading totcts from fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 19:16:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 19:16:55 2012] Using photon index=1.80, rate=0.7, arf fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 19:16:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 19:16:55 2012] Updating source flux to 6.2e-12
[Mon Jul 23 19:16:57 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon Jul 23 19:17:11 2012] Reading fit data from xmm0502710201/analysis//spectral/fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 19:17:11 2012] Spectral fit parameter nH value = 1.88674e+21
[Mon Jul 23 19:17:11 2012] Spectral fit parameter PhoIndex value = 7.16338
[Mon Jul 23 19:17:11 2012] Failed to get F(0.3-8.0) from xmm0502710201/analysis//spectral/fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 19:17:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 19:17:11 2012] Using Nh = 1.9e+21, photon index=7.16, rate=0.7, arf fullrun_mos1_xmm0502710201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 19:17:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 19:17:11 2012] Updating source flux to 4.1e-12