[Tue Feb 21 19:35:13 2012] Detection parameters:
  Position = (204.6, 151.9) = 11 54 8.01 22 50 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 366.1 +/- 26.9
  Background counts = 81.2
  Rate = 0.006 +/- 0.0005

[Tue Feb 21 19:35:16 2012] Off-axis axis estimate = 12.62'
[Tue Feb 21 21:49:50 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 21:49:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 21:49:50 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Tue Feb 21 21:49:50 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Tue Feb 21 21:49:50 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.74"
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src7.ximg exists
[Tue Feb 21 22:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src7.csv
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Feb 21 22:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src7.csv
[Tue Feb 21 22:54:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Feb 21 22:54:22 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Feb 21 22:54:53 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.371145 pixels away
[Tue Feb 21 22:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 22:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 22:54:53 2012] Assessing source extent using major
[Tue Feb 21 22:54:53 2012] Source does appear to be extended
[Tue Feb 21 22:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 00:44:39 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 00:44:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 00:44:39 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Wed Feb 22 00:44:39 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Wed Feb 22 00:44:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.74"
[Wed Feb 22 02:02:25 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src7.ximg exists
[Wed Feb 22 02:02:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src7.csv
[Wed Feb 22 02:02:25 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Feb 22 02:02:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src7.csv
[Wed Feb 22 02:02:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 02:02:26 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Feb 22 02:02:26 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Feb 22 02:02:26 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Feb 22 02:02:55 2012] Spatial fit model total counts = 545.998000, observed total counts = 546.000000
[Wed Feb 22 02:02:55 2012] Offset between fit and detection position for source 2 = 0.264055 pixels
[Wed Feb 22 02:02:55 2012] 547.760000 total counts/ 370.618000 bgd. counts: snr = 9.201493
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.264055 pixels
  Position = (204.8, 151.8) = 11 54 7.92 22 50 19.8
  Extent = 5.2 (4.4-6.0)", rotation angle = 0
  Source counts = 177.1 +/- 23.4
  Background counts = 370.6
  Rate = 0.004 +/- 0.0005
[Wed Feb 22 02:02:55 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 02:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 02:02:55 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 02:02:55 2012] Source does appear to be extended
[Wed Feb 22 02:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 04:17:14 2012] XMMSAS src. selection expression = ellipse(17771.904400, 13161.173200, 314.683209, 314.683209, 0.000000, X, Y)
[Wed Feb 22 04:17:14 2012] Writing source region out to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src2_src.reg
[Wed Feb 22 04:17:14 2012] Extracting stamp from image fullrun_mos2_xmm0502690601_pi300-10000_cl_sm2.00.img.gz, (187, 134) - (223, 170)
[Wed Feb 22 04:17:14 2012] XMMSAS bgd. selection expression = annulus(17771.904400, 13161.173200, 524.472015, 1048.944030, X, Y) && !ellipse(17013.980728, 11269.300476, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 04:17:14 2012] Writing fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src2.gif
[Wed Feb 22 04:19:15 2012] Mean detx,y = (-12387.88, 5037.97) 
[Wed Feb 22 04:19:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 04:19:28 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 04:19:29 2012] Setting source spectrum file to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Feb 22 04:19:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Feb 22 05:11:04 2012] Updating aperture counts using extracted products
[Wed Feb 22 05:11:04 2012] Error reading totcts from fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Feb 22 05:11:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 05:11:05 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src2.arf
[Wed Feb 22 05:11:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 05:11:05 2012] Updating source flux to 1.1e-13