[Tue Feb 21 19:35:14 2012] Detection parameters:
  Position = (176.4, 272.8) = 11 54 16.92 22 59 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.6 +/- 19.8
  Background counts = 86.3
  Rate = 0.004 +/- 0.0006

[Tue Feb 21 19:35:16 2012] Off-axis axis estimate = 9.04'
[Tue Feb 21 21:49:50 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 21:49:50 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Tue Feb 21 21:49:50 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Tue Feb 21 21:49:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.95"
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src10.ximg exists
[Tue Feb 21 22:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src10.csv
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Feb 21 22:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src10.csv
[Tue Feb 21 22:54:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Feb 21 22:54:22 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Feb 21 22:54:53 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.701122 pixels away
[Tue Feb 21 22:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 22:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 22:54:53 2012] Assessing source extent using major
[Tue Feb 21 22:54:53 2012] Source does appear to be extended
[Tue Feb 21 22:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 00:44:39 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 00:44:39 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Wed Feb 22 00:44:39 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Wed Feb 22 00:44:39 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.95"
[Wed Feb 22 02:02:25 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src10.ximg exists
[Wed Feb 22 02:02:25 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Feb 22 02:02:25 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Feb 22 02:02:26 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Feb 22 02:02:26 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Feb 22 02:02:26 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Feb 22 02:02:55 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.125002 pixels away
[Wed Feb 22 02:02:55 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 02:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 02:02:55 2012] Assessing source extent using major
[Wed Feb 22 02:02:55 2012] Source does appear to be extended
[Wed Feb 22 02:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 04:17:14 2012] XMMSAS src. selection expression = ellipse(15296.885666, 23684.198883, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 04:17:14 2012] Writing source region out to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src16_src.reg
[Wed Feb 22 04:17:14 2012] Extracting stamp from image fullrun_mos2_xmm0502690601_pi300-10000_cl_sm2.00.img.gz, (139, 235) - (214, 310)
[Wed Feb 22 04:17:14 2012] XMMSAS bgd. selection expression = annulus(15296.885666, 23684.198883, 1087.500000, 2175.000000, X, Y) && !ellipse(14111.011520, 25590.409027, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 04:17:14 2012] Writing fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src16.gif
[Wed Feb 22 04:20:21 2012] Mean detx,y = (-9030.75, -5224.78) 
[Wed Feb 22 04:20:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 04:20:48 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 04:20:49 2012] Setting source spectrum file to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Feb 22 04:20:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Feb 22 04:50:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 04:50:55 2012] rmf not generated due to insufficient counts
[Wed Feb 22 05:11:04 2012] Updating aperture counts using extracted products
[Wed Feb 22 05:11:04 2012] Error reading totcts from fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Feb 22 05:11:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 05:11:05 2012] Using photon index=1.80, rate=0.00449, arf fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src16.arf
[Wed Feb 22 05:11:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 05:11:05 2012] Updating source flux to 7e-14
[Wed Feb 22 05:11:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting