[Tue Feb 21 19:35:13 2012] Detection parameters:
  Position = (295.9, 137.9) = 11 53 39.25 22 49 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 515.5 +/- 30.9
  Background counts = 85.6
  Rate = 0.009 +/- 0.0005

[Tue Feb 21 19:35:16 2012] Off-axis axis estimate = 11.64'
[Tue Feb 21 21:49:50 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 21:49:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 21:49:50 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Tue Feb 21 21:49:50 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.819
[Tue Feb 21 21:49:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.25"
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src3.ximg exists
[Tue Feb 21 22:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Feb 21 22:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 22:54:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 21 22:54:22 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 21 22:54:22 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 21 22:54:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.029358 pixels away
[Tue Feb 21 22:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 22:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 22:54:53 2012] Assessing source extent using major
[Tue Feb 21 22:54:53 2012] Source does appear to be extended
[Tue Feb 21 22:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 00:44:39 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 00:44:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 00:44:39 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Wed Feb 22 00:44:39 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.819
[Wed Feb 22 00:44:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.25"
[Wed Feb 22 02:02:25 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Feb 22 02:02:25 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Feb 22 02:02:25 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Feb 22 02:02:26 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 22 02:02:26 2012] fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 22 02:02:26 2012] Fit fullrun_mos2_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Feb 22 02:02:55 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.029358 pixels away
[Wed Feb 22 02:02:55 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 02:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 02:02:55 2012] Assessing source extent using major
[Wed Feb 22 02:02:55 2012] Source does appear to be extended
[Wed Feb 22 02:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 04:17:14 2012] XMMSAS src. selection expression = ellipse(25698.330658, 11951.990814, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 04:17:14 2012] Writing source region out to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src1_src.reg
[Wed Feb 22 04:17:14 2012] Extracting stamp from image fullrun_mos2_xmm0502690601_pi300-10000_cl_sm2.00.img.gz, (258, 100) - (333, 175)
[Wed Feb 22 04:17:14 2012] XMMSAS bgd. selection expression = annulus(25698.330658, 11951.990814, 1087.500000, 2175.000000, X, Y)
[Wed Feb 22 04:17:14 2012] Writing fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src1.gif
[Wed Feb 22 04:17:47 2012] Mean detx,y = (-6231.44, 10190.86) 
[Wed Feb 22 04:17:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 04:17:56 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 04:17:57 2012] Setting source spectrum file to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 04:17:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 22 04:34:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 04:34:42 2012] rmf not generated due to insufficient counts
[Wed Feb 22 05:11:04 2012] Updating aperture counts using extracted products
[Wed Feb 22 05:11:04 2012] Error reading totcts from fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 05:11:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 05:11:05 2012] Using photon index=1.80, rate=0.0091, arf fullrun_mos2_xmm0502690601_pi300-10000_pass1_cl_src1.arf
[Wed Feb 22 05:11:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 05:11:05 2012] Updating source flux to 1.8e-13
[Wed Feb 22 05:11:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting