[Tue Feb 21 19:34:22 2012] Detection parameters:
  Position = (197.3, 130.3) = 11 54 10.29 22 48 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.8 +/- 19.7
  Background counts = 92.0
  Rate = 0.002 +/- 0.0003

[Tue Feb 21 19:34:22 2012] Off-axis axis estimate = 14.23'
[Tue Feb 21 21:06:18 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 21:06:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 21:06:18 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Tue Feb 21 21:06:18 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Tue Feb 21 21:06:18 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.54"
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src18.ximg exists
[Tue Feb 21 21:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src18.csv
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Feb 21 21:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src18.csv
[Tue Feb 21 21:49:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Feb 21 21:49:50 2012] Fit fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Feb 21 22:54:43 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 18.032980 pixels away
[Tue Feb 21 22:54:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 22:54:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 22:54:43 2012] Assessing source extent using major
[Tue Feb 21 22:54:43 2012] Source does appear to be extended
[Tue Feb 21 22:54:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 00:06:35 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 00:06:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 00:06:35 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Wed Feb 22 00:06:35 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Wed Feb 22 00:06:35 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.54"
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src18.ximg exists
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Feb 22 00:44:39 2012] Fit fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src18 appears to have run properly
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Feb 22 00:44:39 2012] Fit fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Feb 22 02:02:45 2012] Warning, spatial fit 18 centroid is now closest to src. 2
[Wed Feb 22 02:02:45 2012] Spatial fit model total counts = 507.181000, observed total counts = 508.000000
[Wed Feb 22 02:02:45 2012] Offset between fit and detection position for source 19 = 0.697409 pixels
[Wed Feb 22 02:02:45 2012] Warning, changing simple spatial fit ID from 18 to 19
[Wed Feb 22 02:02:45 2012] 513.231000 total counts/ 277.074000 bgd. counts: snr = 14.187404
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.697409 pixels
  Position = (197.6, 129.7) = 11 54 10.19 22 48 43.3
  Extent = 26.9 (26.5-27.0)", rotation angle = 0
  Source counts = 236.2 +/- 22.7
  Background counts = 277.1
  Rate = 0.005 +/- 0.0005
[Wed Feb 22 02:02:45 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 02:02:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 02:02:45 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 02:02:45 2012] Source does appear to be extended
[Wed Feb 22 02:02:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 02:02:45 2012] Source is confused with source 11
[Wed Feb 22 03:34:11 2012] XMMSAS src. selection expression = ellipse(17142.796000, 11231.642000, 1612.140046, 1612.140046, 0.000000, X, Y)
[Wed Feb 22 03:34:11 2012] Writing source region out to fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src19_src.reg
[Wed Feb 22 03:34:11 2012] Extracting stamp from image fullrun_mos1_xmm0502690601_pi300-10000_cl_sm2.00.img.gz, (105, 37) - (290, 222)
[Wed Feb 22 03:34:11 2012] XMMSAS bgd. selection expression = annulus(17142.796000, 11231.642000, 2686.900077, 5373.800155, X, Y) && !ellipse(17758.454926, 13170.728912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15485.749800, 12891.303000, 489.330414, 489.330414, 0.000000, X, Y) && !ellipse(20202.726669, 10785.631798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17887.979202, 10902.855988, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 03:34:11 2012] Writing fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src19.gif
[Wed Feb 22 03:41:27 2012] Mean detx,y = (6513.73, 13718.70) 
[Wed Feb 22 03:41:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 03:42:22 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 03:42:22 2012] Setting source spectrum file to fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Feb 22 03:42:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Feb 22 05:11:03 2012] Updating aperture counts using extracted products
[Wed Feb 22 05:11:03 2012] Error reading totcts from fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Feb 22 05:11:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 05:11:04 2012] Using photon index=1.80, rate=0.0052, arf fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src19.arf
[Wed Feb 22 05:11:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 05:11:04 2012] Updating source flux to 9.4e-14
[Wed Feb 22 05:11:07 2012] Flag c found in src. 19 procflags, skipping spectral fitting