[Tue Feb 21 19:34:20 2012] Detection parameters:
  Position = (295.8, 138.2) = 11 53 39.31 22 49 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 385.1 +/- 26.9
  Background counts = 75.7
  Rate = 0.007 +/- 0.0005

[Tue Feb 21 19:34:22 2012] Off-axis axis estimate = 11.62'
[Tue Feb 21 21:06:18 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 21:06:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 21:06:18 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Tue Feb 21 21:06:18 2012] source mask rpix=2.8, npix_max = 43, mask sum = 29, frac = 0.661
[Tue Feb 21 21:06:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.24"
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src5.ximg exists
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Feb 21 21:49:50 2012] Fit fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 21 21:49:50 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 21 21:49:50 2012] Fit fullrun_mos1_xmm0502690601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Feb 21 22:54:43 2012] Spatial fit model total counts = 469.991000, observed total counts = 470.000000
[Tue Feb 21 22:54:43 2012] Offset between fit and detection position for source 1 = 0.629169 pixels
[Tue Feb 21 22:54:43 2012] 475.742000 total counts/ 286.125000 bgd. counts: snr = 11.209839
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.629169 pixels
  Position = (296.4, 138.2) = 11 53 39.11 22 49 20.7
  Extent = 5.7 (4.9-6.4)", rotation angle = 0
  Source counts = 189.6 +/- 21.8
  Background counts = 286.1
  Rate = 0.004 +/- 0.0005
[Tue Feb 21 22:54:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 22:54:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 22:54:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 22:54:43 2012] Source does appear to be extended
[Tue Feb 21 22:54:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 00:06:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 00:06:35 2012] Initial guess for spatial extent in simple fitting = 5.68"
[Wed Feb 22 00:06:35 2012] source mask rpix=1.3, npix_max = 13, mask sum = 10, frac = 0.767
[Wed Feb 22 00:06:35 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.68"
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src5.ximg exists
[Wed Feb 22 00:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src5.csv
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Feb 22 00:44:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src5.csv
[Wed Feb 22 00:44:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Feb 22 00:44:39 2012] fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Feb 22 00:44:39 2012] Fit fullrun_mos1_xmm0502690601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Feb 22 02:02:45 2012] Spatial fit model total counts = 441.801000, observed total counts = 440.000000
[Wed Feb 22 02:02:45 2012] Offset between fit and detection position for source 1 = 0.033580 pixels
[Wed Feb 22 02:02:45 2012] 448.546000 total counts/ 259.456000 bgd. counts: snr = 11.739151
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033580 pixels
  Position = (296.4, 138.2) = 11 53 39.12 22 49 20.6
  Extent = 5.6 (4.9-6.4)", rotation angle = 0
  Source counts = 189.1 +/- 21.2
  Background counts = 259.5
  Rate = 0.004 +/- 0.0005
[Wed Feb 22 02:02:45 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 02:02:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 02:02:45 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 02:02:45 2012] Source does appear to be extended
[Wed Feb 22 02:02:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 03:34:11 2012] XMMSAS src. selection expression = ellipse(25735.024000, 11974.236000, 334.177810, 334.177810, 0.000000, X, Y)
[Wed Feb 22 03:34:11 2012] Writing source region out to fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src1_src.reg
[Wed Feb 22 03:34:11 2012] Extracting stamp from image fullrun_mos1_xmm0502690601_pi300-10000_cl_sm2.00.img.gz, (277, 119) - (316, 157)
[Wed Feb 22 03:34:11 2012] XMMSAS bgd. selection expression = annulus(25735.024000, 11974.236000, 556.963016, 1113.926032, X, Y)
[Wed Feb 22 03:34:11 2012] Writing fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src1.gif
[Wed Feb 22 03:36:08 2012] Mean detx,y = (10377.11, 6067.66) 
[Wed Feb 22 03:36:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 03:36:31 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 03:36:32 2012] Setting source spectrum file to fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 03:36:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 22 05:11:03 2012] Updating aperture counts using extracted products
[Wed Feb 22 05:11:03 2012] Error reading totcts from fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 05:11:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 05:11:03 2012] Using photon index=1.80, rate=0.00417, arf fullrun_mos1_xmm0502690601_pi300-10000_pass1_cl_src1.arf
[Wed Feb 22 05:11:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 05:11:04 2012] Updating source flux to 1.6e-13