[Tue Jun 26 18:42:54 2012] Detection parameters:
  Position = (297.3, 214.9) = 11 55 18.50 23 19 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.4 +/- 23.7
  Background counts = 204.6
  Rate = 0.003 +/- 0.0005

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 6.05'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Tue Jun 26 18:49:04 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.049
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 9.46"
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src89.ximg exists
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src89_1.ximg exists
[Tue Jun 26 22:17:59 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src89 appears to have run properly
[Tue Jun 26 22:18:00 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Tue Jun 26 22:18:00 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Tue Jun 26 22:18:00 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Wed Jun 27 03:28:24 2012] Spatial fit model total counts = 2436.390000, observed total counts = 2456.000000
[Wed Jun 27 03:28:24 2012] Offset between fit and detection position for source 93 = 3.039911 pixels
[Wed Jun 27 03:28:24 2012] 2483.721000 total counts/ 2332.880000 bgd. counts: snr = 3.123009
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 3.039911 pixels
  Position = (297.1, 211.9) = 11 55 18.57 23 19 40.5
  Extent = 19.3" x 11.4", rotation angle = 272
  Source counts = 150.8 +/- 49.8
  Background counts = 2332.9
  Rate = 0.002 +/- 0.0008
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.69
[Wed Jun 27 03:28:24 2012] Source is asymmetric
[Wed Jun 27 03:29:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 15.37"
[Wed Jun 27 03:29:05 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.984
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 15.37"
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src67.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src67.csv
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src67_1.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src67.csv
[Wed Jun 27 06:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Wed Jun 27 06:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src67.csv
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Wed Jun 27 06:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src67.csv
[Wed Jun 27 06:01:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:23 2012] Warning, spatial fit 67 centroid is now closest to src. 86
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.69
[Wed Jun 27 09:30:23 2012] Source is asymmetric
[Wed Jun 27 09:30:59 2012] XMMSAS src. selection expression = ellipse(25798.000701, 18387.687725, 1159.163407, 685.265302, 271.563446, X, Y)
[Wed Jun 27 09:30:59 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src93_src.reg
[Wed Jun 27 09:30:59 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (230, 145) - (364, 279)
[Wed Jun 27 09:30:59 2012] XMMSAS bgd. selection expression = annulus(25798.000701, 18387.687725, 1931.939012, 3863.878024, X, Y) && !ellipse(25965.487800, 23909.475400, 5457.072157, 5457.072157, 0.000000, X, Y) && !ellipse(25354.854828, 22298.294830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.900818, 21778.874191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21945.218414, 18381.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.306000, 21880.426000, 618.828018, 618.828018, 0.000000, X, Y) && !ellipse(22126.386993, 22065.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24027.502136, 21758.170273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28635.152000, 21191.922000, 1354.384039, 1354.384039, 0.000000, X, Y) && !ellipse(27882.424000, 21126.810000, 1323.376038, 1323.376038, 0.000000, X, Y) && !ellipse(29296.753800, 20005.013000, 455.343213, 455.343213, 0.000000, X, Y) && !ellipse(26678.373657, 19940.931488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.493713, 20679.981461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.401400, 21118.486000, 1393.624040, 1393.624040, 0.000000, X, Y) && !ellipse(25952.159424, 20052.478561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.058960, 15442.822006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29855.328613, 16627.436340, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:59 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src93.gif
[Wed Jun 27 10:56:57 2012] Mean detx,y = (2218.01, -5136.12) 
[Wed Jun 27 10:57:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 10:57:33 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 10:57:34 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Wed Jun 27 10:57:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Thu Jun 28 18:16:32 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:32 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Thu Jun 28 18:16:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:34 2012] Using photon index=1.80, rate=0.00247, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src93.arf
[Thu Jun 28 18:16:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:34 2012] Updating source flux to 7.7e-15