[Tue Jun 26 18:42:54 2012] Detection parameters:
  Position = (323.2, 248.0) = 11 55 10.31 23 22 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.3 +/- 28.2
  Background counts = 280.2
  Rate = 0.003 +/- 0.0006

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 4.07'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Tue Jun 26 18:49:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.836
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 8.46"
[Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src76.ximg exists
[Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src76.csv
[Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src76_1.ximg exists
[Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src76.csv
[Tue Jun 26 22:17:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:18:00 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Tue Jun 26 22:18:00 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Tue Jun 26 22:18:00 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Wed Jun 27 03:28:24 2012] Warning, spatial fit 76 centroid is now closest to src. 23
[Wed Jun 27 03:28:24 2012] Source 80 is offset by 8.501569 and -1.540210 pixels which is larger than
2 X fitted extent = 1.082455 x 1.082455, not incorporating fit results
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:24 2012] Source is confused with source 82
[Wed Jun 27 03:29:05 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Wed Jun 27 03:29:05 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.836
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 8.46"
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src58.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src58.csv
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src58_1.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src58.csv
[Wed Jun 27 06:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Wed Jun 27 06:01:24 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Wed Jun 27 09:30:23 2012] Spatial fit model total counts = 4741.520000, observed total counts = 4725.000000
[Wed Jun 27 09:30:23 2012] Offset between fit and detection position for source 80 = 7.551649 pixels
[Wed Jun 27 09:30:23 2012] 4634.540000 total counts/ 4196.110000 bgd. counts: snr = 6.768257
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 7.551649 pixels
  Position = (329.7, 244.1) = 11 55 8.26 23 22 0.7
  Extent = 16.9 (16.9-33.9)", rotation angle = 0
  Source counts = 438.4 +/- 68.1
  Background counts = 4196.1
  Rate = 0.007 +/- 0.001
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:59 2012] XMMSAS src. selection expression = ellipse(28635.152000, 21191.922000, 1015.788029, 1015.788029, 0.000000, X, Y)
[Wed Jun 27 09:30:59 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src80_src.reg
[Wed Jun 27 09:30:59 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (271, 186) - (388, 303)
[Wed Jun 27 09:30:59 2012] XMMSAS bgd. selection expression = annulus(28635.152000, 21191.922000, 1692.980049, 3385.960097, X, Y) && !ellipse(25965.487800, 23909.475400, 5457.072157, 5457.072157, 0.000000, X, Y) && !ellipse(25354.854828, 22298.294830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.900818, 21778.874191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.306000, 21880.426000, 618.828018, 618.828018, 0.000000, X, Y) && !ellipse(28607.640076, 25344.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.282166, 25370.389404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.424000, 21126.810000, 1323.376038, 1323.376038, 0.000000, X, Y) && !ellipse(29296.753800, 20005.013000, 455.343213, 455.343213, 0.000000, X, Y) && !ellipse(26678.373657, 19940.931488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.493713, 20679.981461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.401400, 21118.486000, 1393.624040, 1393.624040, 0.000000, X, Y) && !ellipse(25952.159424, 20052.478561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.000701, 18387.687725, 1545.551209, 913.687069, 271.563446, X, Y)
[Wed Jun 27 09:30:59 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src80.gif
[Wed Jun 27 10:49:24 2012] Mean detx,y = (-1264.27, -3845.02) 
[Wed Jun 27 10:49:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 10:49:55 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 10:49:55 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Wed Jun 27 10:49:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Thu Jun 28 18:16:32 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:32 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Thu Jun 28 18:16:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:34 2012] Using photon index=1.80, rate=0.00717, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src80.arf
[Thu Jun 28 18:16:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:34 2012] Updating source flux to 2.2e-14
[Thu Jun 28 18:21:57 2012] Flag b found in src. 80 procflags, skipping spectral fitting
[Thu Jun 28 18:21:57 2012] Flag c found in src. 80 procflags, skipping spectral fitting