[Tue Jun 26 18:42:52 2012] Detection parameters:
  Position = (395.8, 302.1) = 11 54 47.38 23 26 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3201.0 +/- 69.6
  Background counts = 82.6
  Rate = 0.04 +/- 0.0009

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 7.06'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Tue Jun 26 18:49:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.157
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.96"
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src6.csv
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src6.csv
[Tue Jun 26 22:17:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 26 22:17:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:23 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.548945 pixels away
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:29:05 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Wed Jun 27 03:29:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.157
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.96"
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src6.csv
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src6.csv
[Wed Jun 27 06:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jun 27 06:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:23 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.814196 pixels away
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:57 2012] Counts = 3201.038574, rescaling region sizes by 2.000000
[Wed Jun 27 09:30:57 2012] XMMSAS src. selection expression = ellipse(34382.400482, 26238.512299, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src8_src.reg
[Wed Jun 27 09:30:57 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (321, 227) - (471, 377)
[Wed Jun 27 09:30:57 2012] XMMSAS bgd. selection expression = annulus(34382.400482, 26238.512299, 4350.000000, 8700.000000, X, Y) && !ellipse(25965.487800, 23909.475400, 5457.072157, 5457.072157, 0.000000, X, Y) && !ellipse(29772.037689, 32322.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34549.141632, 29953.089447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.540924, 28763.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25354.854828, 22298.294830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.900818, 21778.874191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.734800, 19968.156200, 450.347213, 450.347213, 0.000000, X, Y) && !ellipse(25229.131226, 34606.147766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.306000, 21880.426000, 618.828018, 618.828018, 0.000000, X, Y) && !ellipse(39020.540192, 33719.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37027.793500, 32063.319400, 538.608015, 538.608015, 0.000000, X, Y) && !ellipse(37745.898600, 30903.290200, 452.622413, 452.622413, 0.000000, X, Y) && !ellipse(25656.721039, 30011.805420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29305.509400, 29476.678000, 418.789612, 418.789612, 0.000000, X, Y) && !ellipse(37020.026062, 28738.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.820038, 28402.215149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.259094, 28138.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27100.924225, 27354.859192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.836151, 27174.011871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.032623, 27081.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.020782, 26810.121521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27053.327515, 26765.317902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.862244, 25982.036469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.640076, 25344.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.282166, 25370.389404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33685.347600, 23623.228200, 483.768014, 483.768014, 0.000000, X, Y) && !ellipse(28635.152000, 21191.922000, 1354.384039, 1354.384039, 0.000000, X, Y) && !ellipse(27882.424000, 21126.810000, 1323.376038, 1323.376038, 0.000000, X, Y) && !ellipse(29296.753800, 20005.013000, 455.343213, 455.343213, 0.000000, X, Y) && !ellipse(26678.373657, 19940.931488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.493713, 20679.981461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.401400, 21118.486000, 1393.624040, 1393.624040, 0.000000, X, Y) && !ellipse(25952.159424, 20052.478561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43268.796814, 18941.774933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.000701, 18387.687725, 1545.551209, 913.687069, 271.563446, X, Y) && !ellipse(33663.527405, 18064.956818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36485.377502, 17178.134552, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src8.gif
[Wed Jun 27 09:46:48 2012] Mean detx,y = (-8876.59, -1884.98) 
[Wed Jun 27 09:46:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:48:19 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:48:20 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jun 27 09:48:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jun 28 09:56:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 09:56:35 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:31 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:31 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 28 18:16:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:33 2012] Using photon index=1.80, rate=0.0432, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src8.arf
[Thu Jun 28 18:16:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:33 2012] Updating source flux to 1.8e-13
[Thu Jun 28 18:21:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting