[Tue Jun 26 18:42:54 2012] Detection parameters:
  Position = (326.6, 284.1) = 11 55 9.24 23 24 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.2 +/- 28.8
  Background counts = 290.4
  Rate = 0.008 +/- 0.0007

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 2.29'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Jun 26 18:49:04 2012] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.946
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 7.57"
[Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src65.ximg exists
[Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src65.csv
[Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src65_1.ximg exists
[Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src65.csv
[Tue Jun 26 22:17:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:18:00 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Tue Jun 26 22:18:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Tue Jun 26 22:18:00 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Jun 26 22:18:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Tue Jun 26 22:18:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:24 2012] Spatial fit model total counts = 4529.560000, observed total counts = 4331.000000
[Wed Jun 27 03:28:24 2012] Offset between fit and detection position for source 69 = 3.452069 pixels
[Wed Jun 27 03:28:24 2012] Warning, changing simple spatial fit ID from 65 to 63
[Wed Jun 27 03:28:24 2012] 2722.967800 total counts/ 2710.020000 bgd. counts: snr = 0.248719
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 3.452069 pixels
  Position = (329.2, 286.3) = 11 55 8.41 23 25 4.2
  Extent = 14.5" x 14.5", rotation angle = 351
  Source counts = 12.9 +/- 52.2
  Background counts = 2710.0
  Rate = 0.0002 +/- 0.0009
  Deleting source due to low Poisson probability