[Tue Jun 26 18:42:52 2012] Detection parameters:
  Position = (342.8, 372.1) = 11 55 4.12 23 31 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1471.9 +/- 46.2
  Background counts = 84.6
  Rate = 0.02 +/- 0.0006

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 6.23'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Tue Jun 26 18:49:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.964
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.54"
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src4.csv
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src4.csv
[Tue Jun 26 22:17:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun 26 22:17:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:23 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.604305 pixels away
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:29:05 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Jun 27 03:29:05 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.964
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.54"
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 27 06:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 27 06:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:23 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.221124 pixels away
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:57 2012] Counts = 1471.856323, rescaling region sizes by 2.000000
[Wed Jun 27 09:30:57 2012] XMMSAS src. selection expression = ellipse(29772.037689, 32322.360596, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun 27 09:30:57 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (268, 297) - (418, 447)
[Wed Jun 27 09:30:57 2012] XMMSAS bgd. selection expression = annulus(29772.037689, 32322.360596, 4350.000000, 8700.000000, X, Y) && !ellipse(25965.487800, 23909.475400, 5457.072157, 5457.072157, 0.000000, X, Y) && !ellipse(21029.216400, 27644.835800, 450.328013, 450.328013, 0.000000, X, Y) && !ellipse(34549.141632, 29953.089447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.540924, 28763.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.400482, 26238.512299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.907400, 24441.833000, 360.459210, 360.459210, 0.000000, X, Y) && !ellipse(33400.214874, 36733.686462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26284.696533, 37908.074951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25229.131226, 34606.147766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.763611, 39313.496124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31959.184448, 39191.508148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26758.369690, 36900.828522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19511.712000, 36921.712000, 1813.000052, 1813.000052, 0.000000, X, Y) && !ellipse(39020.540192, 33719.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37027.793500, 32063.319400, 538.608015, 538.608015, 0.000000, X, Y) && !ellipse(37745.898600, 30903.290200, 452.622413, 452.622413, 0.000000, X, Y) && !ellipse(25656.721039, 30011.805420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29305.509400, 29476.678000, 418.789612, 418.789612, 0.000000, X, Y) && !ellipse(37020.026062, 28738.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.820038, 28402.215149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.259094, 28138.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27100.924225, 27354.859192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.836151, 27174.011871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.032623, 27081.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.020782, 26810.121521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27053.327515, 26765.317902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.862244, 25982.036469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.174320, 25809.014200, 346.000810, 346.000810, 0.000000, X, Y) && !ellipse(28607.640076, 25344.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.282166, 25370.389404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33685.347600, 23623.228200, 483.768014, 483.768014, 0.000000, X, Y) && !ellipse(30992.475006, 40497.915314, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src4.gif
[Wed Jun 27 09:38:53 2012] Mean detx,y = (-7222.39, 5594.75) 
[Wed Jun 27 09:38:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:41:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:41:46 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 27 09:41:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jun 28 09:55:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 09:55:05 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:31 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:31 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jun 28 18:16:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:33 2012] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src4.arf
[Thu Jun 28 18:16:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:33 2012] Updating source flux to 8.3e-14
[Thu Jun 28 18:21:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting