[Tue Jun 26 18:42:53 2012] Detection parameters: Position = (245.2, 398.4) = 11 55 34.99 23 33 13.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 78.4 +/- 16.5 Background counts = 76.9 Rate = 0.001 +/- 0.0002 [Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 8.21' [Tue Jun 26 18:49:04 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting [Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 10.53" [Tue Jun 26 18:49:04 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054 [Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 10.53" [Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src34.ximg exists [Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src34.csv [Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src34_1.ximg exists [Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src34.csv [Tue Jun 26 22:17:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Tue Jun 26 22:17:59 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly [Wed Jun 27 03:28:24 2012] Source 36 is offset by -0.058326 and -4.347908 pixels which is larger than 2 X fitted extent = 1.280147 x 1.280147, not incorporating fit results [Wed Jun 27 03:28:24 2012] Spatial fit model total counts = 966.017000, observed total counts = 964.000000 [Wed Jun 27 03:28:24 2012] Offset between fit and detection position for source 36 = 0.129894 pixels [Wed Jun 27 03:28:24 2012] 962.918300 total counts/ 933.425000 bgd. counts: snr = 0.965347 Spatial fit parameters: Offset between fit and detection position for source 36 = 0.129894 pixels Position = (245.2, 398.5) = 11 55 34.99 23 33 12.3 Extent = 3.9 (2.6-6.7)", rotation angle = 0 Source counts = 29.5 +/- 31.0 Background counts = 933.4 Rate = 0.0005 +/- 0.0005 Deleting source due to low Poisson probability