[Tue Jun 26 18:42:52 2012] Detection parameters: Position = (308.1, 424.7) = 11 55 15.07 23 35 7.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 153.2 +/- 19.6 Background counts = 72.5 Rate = 0.002 +/- 0.0003 [Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 9.18' [Tue Jun 26 18:49:04 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting [Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 11.02" [Tue Jun 26 18:49:04 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978 [Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.02" [Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src27.ximg exists [Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src27.csv [Tue Jun 26 22:17:58 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src27_1.ximg exists [Tue Jun 26 22:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src27.csv [Tue Jun 26 22:17:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists [Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists [Tue Jun 26 22:17:59 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly [Wed Jun 27 03:28:24 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.190355 pixels away [Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000 [Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 27 03:28:24 2012] Assessing source extent using major [Wed Jun 27 03:28:24 2012] Source does appear to be extended [Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 27 03:29:05 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting [Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 11.02" [Wed Jun 27 03:29:05 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978 [Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 11.02" [Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src24.ximg exists [Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src24_1.ximg exists [Wed Jun 27 06:01:23 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src24 appears to have run properly [Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Wed Jun 27 06:01:24 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly [Wed Jun 27 09:30:23 2012] Source 29 is offset by 0.724111 and -2.676063 pixels which is larger than 2 X fitted extent = 1.349439 x 1.349439, not incorporating fit results [Wed Jun 27 09:30:23 2012] Warning, spatial fit 24 centroid is now closest to src. 19 [Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000 [Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 27 09:30:23 2012] Assessing source extent using major [Wed Jun 27 09:30:23 2012] Source does appear to be extended [Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 27 09:30:58 2012] XMMSAS src. selection expression = ellipse(26758.369690, 36900.828522, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 27 09:30:58 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src29_src.reg [Wed Jun 27 09:30:58 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (271, 387) - (346, 462) [Wed Jun 27 09:30:58 2012] XMMSAS bgd. selection expression = annulus(26758.369690, 36900.828522, 1087.500000, 2175.000000, X, Y) && !ellipse(26284.696533, 37908.074951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25229.131226, 34606.147766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.763611, 39313.496124, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 27 09:30:58 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src29.gif [Wed Jun 27 10:12:53 2012] Mean detx,y = (-6528.62, 11010.78) [Wed Jun 27 10:12:58 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jun 27 10:13:29 2012] Binned source spectrum to 10 counts/bin [Wed Jun 27 10:13:29 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Wed Jun 27 10:13:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src29_bgd.pi.gz [Thu Jun 28 11:41:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 28 11:41:54 2012] rmf not generated due to insufficient counts [Thu Jun 28 18:16:31 2012] Updating aperture counts using extracted products [Thu Jun 28 18:16:31 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Thu Jun 28 18:16:33 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jun 28 18:16:33 2012] Using photon index=1.80, rate=0.00206, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src29.arf [Thu Jun 28 18:16:33 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 28 18:16:33 2012] Updating source flux to 1.1e-14 [Thu Jun 28 18:21:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting