[Tue Jun 26 18:42:52 2012] Detection parameters:
  Position = (292.0, 256.9) = 11 55 20.17 23 22 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2326.4 +/- 66.6
  Background counts = 445.1
  Rate = 0.05 +/- 0.001

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 3.05'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Jun 26 18:49:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.738
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.95"
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src9.csv
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src9.csv
[Tue Jun 26 22:17:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 26 22:17:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:23 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:24 2012] Source is confused with source 14
[Wed Jun 27 03:29:05 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Wed Jun 27 03:29:05 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.738
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.95"
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src9.csv
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 27 06:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src9.csv
[Wed Jun 27 06:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 27 06:01:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 27 06:01:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 27 06:01:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:23 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.954962 pixels away
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:57 2012] Counts = 2326.443604, rescaling region sizes by 2.000000
[Wed Jun 27 09:30:57 2012] XMMSAS src. selection expression = ellipse(25354.854828, 22298.294830, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src11_src.reg
[Wed Jun 27 09:30:57 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (217, 182) - (367, 332)
[Wed Jun 27 09:30:57 2012] XMMSAS bgd. selection expression = annulus(25354.854828, 22298.294830, 4350.000000, 8700.000000, X, Y) && !ellipse(25965.487800, 23909.475400, 5457.072157, 5457.072157, 0.000000, X, Y) && !ellipse(21029.216400, 27644.835800, 450.328013, 450.328013, 0.000000, X, Y) && !ellipse(34549.141632, 29953.089447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.540924, 28763.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.400482, 26238.512299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.907400, 24441.833000, 360.459210, 360.459210, 0.000000, X, Y) && !ellipse(17063.847488, 23506.234924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19291.837891, 21335.532089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.900818, 21778.874191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.734800, 19968.156200, 450.347213, 450.347213, 0.000000, X, Y) && !ellipse(21945.218414, 18381.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.306000, 21880.426000, 618.828018, 618.828018, 0.000000, X, Y) && !ellipse(25656.721039, 30011.805420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15928.519791, 29547.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29305.509400, 29476.678000, 418.789612, 418.789612, 0.000000, X, Y) && !ellipse(25480.820038, 28402.215149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.259094, 28138.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27100.924225, 27354.859192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.836151, 27174.011871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16394.024750, 27122.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.032623, 27081.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.020782, 26810.121521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27053.327515, 26765.317902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.862244, 25982.036469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.174320, 25809.014200, 346.000810, 346.000810, 0.000000, X, Y) && !ellipse(28607.640076, 25344.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.282166, 25370.389404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19216.174000, 24156.454000, 1463.672042, 952.248027, 120.308100, X, Y) && !ellipse(16747.144974, 24359.723297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18061.401733, 24493.409332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33685.347600, 23623.228200, 483.768014, 483.768014, 0.000000, X, Y) && !ellipse(22126.386993, 22065.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24027.502136, 21758.170273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28635.152000, 21191.922000, 1354.384039, 1354.384039, 0.000000, X, Y) && !ellipse(27882.424000, 21126.810000, 1323.376038, 1323.376038, 0.000000, X, Y) && !ellipse(19460.847600, 14531.728200, 483.768114, 483.768114, 0.000000, X, Y) && !ellipse(29296.753800, 20005.013000, 455.343213, 455.343213, 0.000000, X, Y) && !ellipse(26678.373657, 19940.931488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.493713, 20679.981461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.401400, 21118.486000, 1393.624040, 1393.624040, 0.000000, X, Y) && !ellipse(25952.159424, 20052.478561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.000701, 18387.687725, 1545.551209, 913.687069, 271.563446, X, Y) && !ellipse(33663.527405, 18064.956818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.058960, 15442.822006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19521.582886, 17648.107925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29855.328613, 16627.436340, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src11.gif
[Wed Jun 27 09:51:40 2012] Mean detx,y = (716.98, -1295.49) 
[Wed Jun 27 09:51:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:53:14 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:53:15 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 27 09:53:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 28 10:01:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 10:01:50 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:31 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:31 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 28 18:16:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:33 2012] Using photon index=1.80, rate=0.0467, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src11.arf
[Thu Jun 28 18:16:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:33 2012] Updating source flux to 1.2e-13
[Thu Jun 28 18:21:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting