[Tue Jun 26 18:42:52 2012] Detection parameters:
  Position = (196.7, 270.7) = 11 55 50.29 23 23 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1515.7 +/- 45.7
  Background counts = 68.2
  Rate = 0.04 +/- 0.001

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 7.64'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Tue Jun 26 18:49:04 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.889
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.25"
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src8.csv
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src8.csv
[Tue Jun 26 22:17:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jun 26 22:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 26 22:17:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:23 2012] Source 10 is offset by 7.409258 and 6.449597 pixels which is larger than
2 X fitted extent = 3.097632 x 6.728322, not incorporating fit results
[Wed Jun 27 03:28:24 2012] Source 10 is offset by -5.698650 and 3.732011 pixels which is larger than
2 X fitted extent = 1.383384 x 1.383384, not incorporating fit results
[Wed Jun 27 03:28:24 2012] Source 10 is offset by 7.761281 and -2.196550 pixels which is larger than
2 X fitted extent = 1.275237 x 1.275237, not incorporating fit results
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:29:05 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Wed Jun 27 03:29:05 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.889
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.25"
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src8.csv
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src8.csv
[Wed Jun 27 06:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jun 27 06:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Jun 27 06:01:24 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jun 27 06:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Jun 27 06:01:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:23 2012] Warning, spatial fit 8 centroid is now closest to src. 72
[Wed Jun 27 09:30:23 2012] Source 10 is offset by -0.259098 and -1.306004 pixels which is larger than
2 X fitted extent = 3.262272 x 1.189951, not incorporating fit results
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:57 2012] Counts = 1515.701538, rescaling region sizes by 2.000000
[Wed Jun 27 09:30:57 2012] XMMSAS src. selection expression = ellipse(17063.847488, 23506.234924, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 27 09:30:57 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (122, 196) - (272, 346)
[Wed Jun 27 09:30:57 2012] XMMSAS bgd. selection expression = annulus(17063.847488, 23506.234924, 4350.000000, 8700.000000, X, Y) && !ellipse(25965.487800, 23909.475400, 5457.072157, 5457.072157, 0.000000, X, Y) && !ellipse(21029.216400, 27644.835800, 450.328013, 450.328013, 0.000000, X, Y) && !ellipse(12509.900085, 32225.518402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.540924, 28763.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15215.485123, 26618.887726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.907400, 24441.833000, 360.459210, 360.459210, 0.000000, X, Y) && !ellipse(25354.854828, 22298.294830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19291.837891, 21335.532089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.900818, 21778.874191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21945.218414, 18381.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13751.164780, 17595.785263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19395.177400, 32113.362200, 427.754412, 427.754412, 0.000000, X, Y) && !ellipse(25656.721039, 30011.805420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15928.519791, 29547.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13330.740891, 28832.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.820038, 28402.215149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16394.024750, 27122.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.174320, 25809.014200, 346.000810, 346.000810, 0.000000, X, Y) && !ellipse(19216.174000, 24156.454000, 1463.672042, 952.248027, 120.308100, X, Y) && !ellipse(16747.144974, 24359.723297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18061.401733, 24493.409332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22126.386993, 22065.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24027.502136, 21758.170273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19460.847600, 14531.728200, 483.768114, 483.768114, 0.000000, X, Y) && !ellipse(25246.401400, 21118.486000, 1393.624040, 1393.624040, 0.000000, X, Y) && !ellipse(25952.159424, 20052.478561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.000701, 18387.687725, 1545.551209, 913.687069, 271.563446, X, Y) && !ellipse(26539.058960, 15442.822006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19521.582886, 17648.107925, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src10.gif
[Wed Jun 27 09:49:14 2012] Mean detx,y = (7907.75, 3143.86) 
[Wed Jun 27 09:49:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:51:20 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:51:21 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 27 09:51:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 28 10:01:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 10:01:21 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:31 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:31 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 28 18:16:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:33 2012] Using photon index=1.80, rate=0.0404, arf fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src10.arf
[Thu Jun 28 18:16:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:33 2012] Updating source flux to 1.4e-13
[Thu Jun 28 18:21:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting