[Tue Jun 26 18:42:51 2012] Detection parameters:
  Position = (299.2, 276.0) = 11 55 17.91 23 24 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29343.1 +/- 209.3
  Background counts = 469.4
  Rate = 0.5 +/- 0.004

[Tue Jun 26 18:42:55 2012] Off-axis axis estimate = 1.63'
[Tue Jun 26 18:49:04 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 18:49:04 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jun 26 18:49:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Tue Jun 26 18:49:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 22:17:57 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 26 22:17:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 22:17:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 22:17:59 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 22:17:59 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 03:28:23 2012] Spatial fit model total counts = 79854.500000, observed total counts = 86642.000000
[Wed Jun 27 03:28:23 2012] Offset between fit and detection position for source 1 = 0.835281 pixels
[Wed Jun 27 03:28:23 2012] 79820.200000 total counts/ 25600.000000 bgd. counts: snr = 338.876250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.835281 pixels
  Position = (299.5, 275.2) = 11 55 17.82 23 24 15.7
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 54220.2 +/- 282.5
  Background counts = 25600.0
  Rate = 0.9 +/- 0.005
[Wed Jun 27 03:28:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:24 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 03:28:24 2012] Source does appear to be extended
[Wed Jun 27 03:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:29:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 03:29:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 03:29:05 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Wed Jun 27 03:29:05 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.954
[Wed Jun 27 03:29:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.49"
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 06:01:22 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 27 06:01:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 06:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 06:01:23 2012] fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 06:01:23 2012] Fit fullrun_pn_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 27 09:30:23 2012] Spatial fit model total counts = 154472.000000, observed total counts = 144024.000000
[Wed Jun 27 09:30:23 2012] Offset between fit and detection position for source 1 = 0.490792 pixels
[Wed Jun 27 09:30:23 2012] 153430.600000 total counts/ 71974.900000 bgd. counts: snr = 303.620398
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.490792 pixels
  Position = (299.0, 275.4) = 11 55 17.96 23 24 16.6
  Extent = 22.7 (22.5-23.1)", rotation angle = 0
  Source counts = 81455.7 +/- 391.7
  Background counts = 71974.9
  Rate = 1 +/- 0.006
[Wed Jun 27 09:30:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:23 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:30:23 2012] Source does appear to be extended
[Wed Jun 27 09:30:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:57 2012] Counts = 81455.700000, rescaling region sizes by 3.000000
[Wed Jun 27 09:30:57 2012] XMMSAS src. selection expression = ellipse(25965.487800, 23909.475400, 4092.804118, 4092.804118, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing source region out to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 27 09:30:57 2012] Extracting stamp from image fullrun_pn_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (64, 40) - (534, 511)
[Wed Jun 27 09:30:57 2012] XMMSAS bgd. selection expression = annulus(25965.487800, 23909.475400, 20464.020589, 40928.041178, X, Y) && !ellipse(21029.216400, 27644.835800, 450.328013, 450.328013, 0.000000, X, Y) && !ellipse(12509.900085, 32225.518402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29772.037689, 32322.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34549.141632, 29953.089447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.540924, 28763.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15215.485123, 26618.887726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34382.400482, 26238.512299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.907400, 24441.833000, 360.459210, 360.459210, 0.000000, X, Y) && !ellipse(17063.847488, 23506.234924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25354.854828, 22298.294830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19291.837891, 21335.532089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.900818, 21778.874191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.734800, 19968.156200, 450.347213, 450.347213, 0.000000, X, Y) && !ellipse(21945.218414, 18381.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13751.164780, 17595.785263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33400.214874, 36733.686462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26284.696533, 37908.074951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19992.683319, 37203.777985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20440.078600, 35811.819000, 460.520013, 460.520013, 0.000000, X, Y) && !ellipse(25229.131226, 34606.147766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.306000, 21880.426000, 618.828018, 618.828018, 0.000000, X, Y) && !ellipse(24309.763611, 39313.496124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31959.184448, 39191.508148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26758.369690, 36900.828522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19511.712000, 36921.712000, 1813.000052, 1813.000052, 0.000000, X, Y) && !ellipse(30153.183360, 11381.317200, 557.049616, 557.049616, 0.000000, X, Y) && !ellipse(39020.540192, 33719.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19395.177400, 32113.362200, 427.754412, 427.754412, 0.000000, X, Y) && !ellipse(37027.793500, 32063.319400, 538.608015, 538.608015, 0.000000, X, Y) && !ellipse(37745.898600, 30903.290200, 452.622413, 452.622413, 0.000000, X, Y) && !ellipse(25656.721039, 30011.805420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15928.519791, 29547.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29305.509400, 29476.678000, 418.789612, 418.789612, 0.000000, X, Y) && !ellipse(13330.740891, 28832.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37020.026062, 28738.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.820038, 28402.215149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.259094, 28138.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27100.924225, 27354.859192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.836151, 27174.011871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16394.024750, 27122.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.032623, 27081.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.020782, 26810.121521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27053.327515, 26765.317902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.862244, 25982.036469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15696.148972, 13634.964767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.174320, 25809.014200, 346.000810, 346.000810, 0.000000, X, Y) && !ellipse(28607.640076, 25344.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.282166, 25370.389404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19216.174000, 24156.454000, 1463.672042, 952.248027, 120.308100, X, Y) && !ellipse(16747.144974, 24359.723297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18061.401733, 24493.409332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33685.347600, 23623.228200, 483.768014, 483.768014, 0.000000, X, Y) && !ellipse(22126.386993, 22065.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24027.502136, 21758.170273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28635.152000, 21191.922000, 1354.384039, 1354.384039, 0.000000, X, Y) && !ellipse(27882.424000, 21126.810000, 1323.376038, 1323.376038, 0.000000, X, Y) && !ellipse(19460.847600, 14531.728200, 483.768114, 483.768114, 0.000000, X, Y) && !ellipse(29296.753800, 20005.013000, 455.343213, 455.343213, 0.000000, X, Y) && !ellipse(26678.373657, 19940.931488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.493713, 20679.981461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.401400, 21118.486000, 1393.624040, 1393.624040, 0.000000, X, Y) && !ellipse(25952.159424, 20052.478561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43268.796814, 18941.774933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.000701, 18387.687725, 1545.551209, 913.687069, 271.563446, X, Y) && !ellipse(33663.527405, 18064.956818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.058960, 15442.822006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19521.582886, 17648.107925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36485.377502, 17178.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29855.328613, 16627.436340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39014.091125, 15797.478165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30992.475006, 40497.915314, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 09:30:57 2012] Writing fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src1.gif
[Wed Jun 27 09:31:28 2012] Mean detx,y = (-183.98, -188.77) 
[Wed Jun 27 09:31:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:35:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:35:32 2012] Setting source spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 09:35:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 18:16:30 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:31 2012] Error reading totcts from fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 18:16:32 2012] No arf file for this source, not re-computing flux
[Thu Jun 28 18:21:57 2012] Source 1 has no response, skipping
[Thu Jun 28 18:24:20 2012] xmm0502690201/analysis//spectral/fullrun_pn_xmm0502690201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete