[Tue Jun 26 18:44:16 2012] Detection parameters:
  Position = (293.3, 327.0) = 11 55 19.75 23 28 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 18.8
  Background counts = 82.7
  Rate = 0.002 +/- 0.0003

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 2.11'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Jun 27 00:54:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.015
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 7.48"
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src50.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src50.csv
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src50.csv
[Wed Jun 27 03:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed Jun 27 03:28:02 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Wed Jun 27 03:28:48 2012] Warning, spatial fit 50 centroid is now closest to src. 57
[Wed Jun 27 03:28:48 2012] Source 56 is offset by 1.899698 and -0.384694 pixels which is larger than
2 X fitted extent = 0.855186 x 0.855186, not incorporating fit results
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:48 2012] Source is confused with source 6
[Wed Jun 27 07:17:50 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Jun 27 07:17:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.015
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 7.48"
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src47.ximg exists
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed Jun 27 09:30:05 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src47 appears to have run properly
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed Jun 27 09:30:06 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Wed Jun 27 09:30:42 2012] Warning, spatial fit 47 centroid is now closest to src. 57
[Wed Jun 27 09:30:42 2012] Source 56 is offset by -6.405130 and -0.615016 pixels which is larger than
2 X fitted extent = 5.238851 x 2.127117, not incorporating fit results
[Wed Jun 27 09:30:42 2012] Source 56 is offset by -2.092962 and 3.910686 pixels which is larger than
2 X fitted extent = 1.641761 x 1.641761, not incorporating fit results
[Wed Jun 27 09:30:42 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 19.144427 pixels away
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:08:55 2012] XMMSAS src. selection expression = ellipse(25472.525726, 28403.773651, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 15:08:55 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src56_src.reg
[Thu Jun 28 15:08:55 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (256, 290) - (331, 365)
[Thu Jun 28 15:08:55 2012] XMMSAS bgd. selection expression = annulus(25472.525726, 28403.773651, 1087.500000, 2175.000000, X, Y) && !ellipse(25959.325440, 23922.271600, 3476.904100, 3476.904100, 0.000000, X, Y) && !ellipse(26011.063600, 28712.123600, 415.878412, 415.878412, 0.000000, X, Y) && !ellipse(23881.714478, 25592.596771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.871460, 27348.168518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27862.113159, 26659.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.908295, 27787.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.070000, 26872.170000, 1142.664033, 1142.664033, 0.000000, X, Y) && !ellipse(24843.968000, 27989.732000, 1197.064034, 1197.064034, 0.000000, X, Y)
[Thu Jun 28 15:08:55 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src56.gif
[Thu Jun 28 15:49:45 2012] Mean detx,y = (2001.53, -4042.39) 
[Thu Jun 28 15:49:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:50:00 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:50:01 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Jun 28 15:50:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Thu Jun 28 17:49:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 17:49:49 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:37 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:37 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Jun 28 18:16:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:39 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src56.arf
[Thu Jun 28 18:16:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:39 2012] Updating source flux to 1.7e-14
[Thu Jun 28 18:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting