[Tue Jun 26 18:44:15 2012] Detection parameters:
  Position = (224.7, 203.4) = 11 55 41.44 23 19 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.7 +/- 15.6
  Background counts = 36.2
  Rate = 0.003 +/- 0.0004

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 8.72'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Jun 27 00:54:22 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.79"
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src35.csv
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src35.csv
[Wed Jun 27 03:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jun 27 03:28:02 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Jun 27 03:28:48 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.844810 pixels away
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 07:17:50 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Jun 27 07:17:50 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.79"
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src34.ximg exists
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Jun 27 09:30:05 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src34 appears to have run properly
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Jun 27 09:30:06 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Wed Jun 27 09:30:41 2012] Source 48 is offset by 2.247949 and 9.234830 pixels which is larger than
2 X fitted extent = 1.240276 x 1.240276, not incorporating fit results
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:08:55 2012] XMMSAS src. selection expression = ellipse(19497.399551, 17645.312180, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 15:08:55 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src48_src.reg
[Thu Jun 28 15:08:55 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (187, 166) - (262, 241)
[Thu Jun 28 15:08:55 2012] XMMSAS bgd. selection expression = annulus(19497.399551, 17645.312180, 1087.500000, 2175.000000, X, Y) && !ellipse(21933.723465, 18384.375427, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 15:08:55 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src48.gif
[Thu Jun 28 15:44:58 2012] Mean detx,y = (-8109.46, 3205.17) 
[Thu Jun 28 15:44:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:45:16 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:45:16 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Jun 28 15:45:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu Jun 28 17:30:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 17:30:59 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:37 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:37 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Jun 28 18:16:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:38 2012] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src48.arf
[Thu Jun 28 18:16:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:39 2012] Updating source flux to 4.1e-14
[Thu Jun 28 18:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting