[Tue Jun 26 18:44:15 2012] Detection parameters:
  Position = (307.2, 239.3) = 11 55 15.38 23 21 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.3 +/- 18.9
  Background counts = 129.2
  Rate = 0.002 +/- 0.0004

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 4.33'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Jun 27 00:54:22 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.652
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.60"
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src39.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src39.csv
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src39.csv
[Wed Jun 27 03:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Jun 27 03:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Jun 27 03:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Jun 27 03:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:48 2012] Source 44 is offset by 5.692501 and -0.679848 pixels which is larger than
2 X fitted extent = 1.009007 x 1.009007, not incorporating fit results
[Wed Jun 27 03:28:48 2012] Warning, spatial fit 39 centroid is now closest to src. 45
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:48 2012] Source is confused with source 45
[Wed Jun 27 07:17:50 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Jun 27 07:17:50 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.652
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 8.60"
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src38.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src38.csv
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src38.csv
[Wed Jun 27 09:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed Jun 27 09:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Jun 27 09:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Jun 27 09:30:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:41 2012] Warning, spatial fit 38 centroid is now closest to src. 40
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:08:55 2012] XMMSAS src. selection expression = ellipse(26673.891968, 20770.539200, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 15:08:55 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src44_src.reg
[Thu Jun 28 15:08:55 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (270, 202) - (345, 277)
[Thu Jun 28 15:08:55 2012] XMMSAS bgd. selection expression = annulus(26673.891968, 20770.539200, 1087.500000, 2175.000000, X, Y) && !ellipse(25959.325440, 23922.271600, 3476.904100, 3476.904100, 0.000000, X, Y) && !ellipse(24942.998718, 23163.067078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.692000, 22487.140000, 2573.984074, 2573.984074, 0.000000, X, Y) && !ellipse(25256.948000, 21813.662000, 1340.560039, 1340.560039, 0.000000, X, Y) && !ellipse(28411.566000, 23054.836000, 1193.864034, 1193.864034, 0.000000, X, Y) && !ellipse(27861.400000, 21158.820000, 1324.040038, 1324.040038, 0.000000, X, Y) && !ellipse(24829.068756, 21363.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.358154, 22213.745422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28293.706757, 22303.960663, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25177.724548, 20752.405350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.895630, 20295.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25679.817139, 20582.888367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23532.485823, 23142.334183, 1375.528040, 719.731982, 312.830843, X, Y) && !ellipse(23666.878000, 21969.072000, 1305.032038, 1305.032038, 0.000000, X, Y) && !ellipse(26202.613647, 19876.804565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24546.312000, 20380.668000, 1376.272040, 1376.272040, 0.000000, X, Y)
[Thu Jun 28 15:08:55 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src44.gif
[Thu Jun 28 15:46:34 2012] Mean detx,y = (-257.27, 3283.97) 
[Thu Jun 28 15:46:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:46:48 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:46:49 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Jun 28 15:46:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu Jun 28 17:35:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 17:35:18 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:37 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:37 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Jun 28 18:16:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:39 2012] Using photon index=1.80, rate=0.00242, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src44.arf
[Thu Jun 28 18:16:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:39 2012] Updating source flux to 3.2e-14
[Thu Jun 28 18:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting