[Tue Jun 26 18:44:15 2012] Detection parameters:
  Position = (275.1, 294.7) = 11 55 25.53 23 25 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.5 +/- 22.1
  Background counts = 135.0
  Rate = 0.003 +/- 0.0004

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 1.72'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jun 27 00:54:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.793
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.29"
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src28.csv
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src28.csv
[Wed Jun 27 03:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jun 27 03:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 27 03:28:02 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jun 27 03:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 27 03:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:48 2012] Source 35 is offset by -3.928822 and 5.708469 pixels which is larger than
2 X fitted extent = 0.837540 x 0.837540, not incorporating fit results
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 07:17:50 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jun 27 07:17:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.793
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.29"
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src27.csv
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src27.csv
[Wed Jun 27 09:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 27 09:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 27 09:30:06 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 27 09:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 27 09:30:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:41 2012] Source 35 is offset by 6.760258 and -6.975072 pixels which is larger than
2 X fitted extent = 6.700322 x 6.700322, not incorporating fit results
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:08:54 2012] XMMSAS src. selection expression = ellipse(23881.714478, 25592.596771, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src35_src.reg
[Thu Jun 28 15:08:54 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (238, 257) - (313, 332)
[Thu Jun 28 15:08:54 2012] XMMSAS bgd. selection expression = annulus(23881.714478, 25592.596771, 1087.500000, 2175.000000, X, Y) && !ellipse(25959.325440, 23922.271600, 3476.904100, 3476.904100, 0.000000, X, Y) && !ellipse(24942.998718, 23163.067078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.281403, 24397.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.692000, 22487.140000, 2573.984074, 2573.984074, 0.000000, X, Y) && !ellipse(22758.569020, 25792.313000, 355.932010, 355.932010, 0.000000, X, Y) && !ellipse(23532.485823, 23142.334183, 1375.528040, 719.731982, 312.830843, X, Y) && !ellipse(22927.628000, 22706.352000, 1384.424040, 303.196809, 146.801000, X, Y) && !ellipse(25472.525726, 28403.773651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.908295, 27787.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.070000, 26872.170000, 1142.664033, 1142.664033, 0.000000, X, Y) && !ellipse(24843.968000, 27989.732000, 1197.064034, 1197.064034, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src35.gif
[Thu Jun 28 15:42:43 2012] Mean detx,y = (-751.18, -2125.53) 
[Thu Jun 28 15:42:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:42:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:42:55 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jun 28 15:42:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Jun 28 17:26:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 17:26:11 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:37 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:37 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jun 28 18:16:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:38 2012] Using photon index=1.80, rate=0.00341, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src35.arf
[Thu Jun 28 18:16:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:38 2012] Updating source flux to 3.4e-14
[Thu Jun 28 18:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting