[Tue Jun 26 18:44:14 2012] Detection parameters:
  Position = (294.2, 252.9) = 11 55 19.46 23 22 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 583.3 +/- 34.0
  Background counts = 156.9
  Rate = 0.01 +/- 0.0006

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 3.32'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Wed Jun 27 00:54:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.808
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.09"
[Wed Jun 27 03:28:00 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 27 03:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src13.csv
[Wed Jun 27 03:28:00 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 27 03:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src13.csv
[Wed Jun 27 03:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 27 03:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:48 2012] Warning, spatial fit 13 centroid is now closest to src. 14
[Wed Jun 27 03:28:48 2012] Spatial fit model total counts = 3194.730000, observed total counts = 3191.000000
[Wed Jun 27 03:28:48 2012] Offset between fit and detection position for source 16 = 3.726620 pixels
[Wed Jun 27 03:28:48 2012] Warning, changing simple spatial fit ID from 13 to 21
[Wed Jun 27 03:28:48 2012] 3268.477000 total counts/ 3060.520000 bgd. counts: snr = 3.759031
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.726620 pixels
  Position = (290.9, 251.3) = 11 55 20.53 23 22 31.8
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source counts = 208.0 +/- 57.2
  Background counts = 3060.5
  Rate = 0.003 +/- 0.0009
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:48 2012] Source is confused with source 14
[Wed Jun 27 03:28:48 2012] Source is confused with source 41
[Wed Jun 27 07:17:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 16.76"
[Wed Jun 27 07:17:50 2012] source mask rpix=3.9, npix_max = 75, mask sum = 72, frac = 0.950
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 16.76"
[Wed Jun 27 09:30:04 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 27 09:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src13.csv
[Wed Jun 27 09:30:04 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 27 09:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src13.csv
[Wed Jun 27 09:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jun 27 09:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:41 2012] Warning, spatial fit 13 centroid is now closest to src. 14
[Wed Jun 27 09:30:41 2012] Source 16 is offset by -2.837126 and -0.000552 pixels which is larger than
2 X fitted extent = 2.693839 x 2.693839, not incorporating fit results
[Wed Jun 27 09:30:41 2012] Source 16 is offset by -4.793149 and 5.348115 pixels which is larger than
2 X fitted extent = 2.274970 x 2.274970, not incorporating fit results
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:08:54 2012] XMMSAS src. selection expression = ellipse(25256.948000, 21813.662000, 1005.420029, 1005.420029, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src16_src.reg
[Thu Jun 28 15:08:54 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (233, 194) - (349, 309)
[Thu Jun 28 15:08:54 2012] XMMSAS bgd. selection expression = annulus(25256.948000, 21813.662000, 1675.700048, 3351.400096, X, Y) && !ellipse(25959.325440, 23922.271600, 3476.904100, 3476.904100, 0.000000, X, Y) && !ellipse(24942.998718, 23163.067078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21933.723465, 18384.375427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.281403, 24397.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.692000, 22487.140000, 2573.984074, 2573.984074, 0.000000, X, Y) && !ellipse(27578.829498, 24153.862946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.566000, 23054.836000, 1193.864034, 1193.864034, 0.000000, X, Y) && !ellipse(27861.400000, 21158.820000, 1324.040038, 1324.040038, 0.000000, X, Y) && !ellipse(24829.068756, 21363.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.358154, 22213.745422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28293.706757, 22303.960663, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25177.724548, 20752.405350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.714478, 25592.596771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.895630, 20295.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25679.817139, 20582.888367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23532.485823, 23142.334183, 1375.528040, 719.731982, 312.830843, X, Y) && !ellipse(26673.891968, 20770.539200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22927.628000, 22706.352000, 1384.424040, 303.196809, 146.801000, X, Y) && !ellipse(23666.878000, 21969.072000, 1305.032038, 1305.032038, 0.000000, X, Y) && !ellipse(26202.613647, 19876.804565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24546.312000, 20380.668000, 1376.272040, 1376.272040, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src16.gif
[Thu Jun 28 15:37:04 2012] Mean detx,y = (-1042.23, 1696.58) 
[Thu Jun 28 15:37:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:37:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:37:18 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jun 28 15:37:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Jun 28 18:16:37 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:37 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jun 28 18:16:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:38 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src16.arf
[Thu Jun 28 18:16:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:38 2012] Updating source flux to 3e-14
[Thu Jun 28 18:18:24 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Thu Jun 28 18:18:24 2012] Flag c found in src. 16 procflags, skipping spectral fitting