[Tue Jun 26 18:44:14 2012] Detection parameters:
  Position = (287.3, 266.8) = 11 55 21.67 23 23 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1363.5 +/- 49.5
  Background counts = 172.7
  Rate = 0.02 +/- 0.0008

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 2.43'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Wed Jun 27 00:54:22 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.932
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.64"
[Wed Jun 27 03:28:00 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 27 03:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src4.csv
[Wed Jun 27 03:28:00 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 27 03:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src4.csv
[Wed Jun 27 03:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 27 03:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 27 03:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:48 2012] Warning, spatial fit 4 centroid is now closest to src. 39
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:48 2012] Source is confused with source 14
[Wed Jun 27 07:17:50 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Wed Jun 27 07:17:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.932
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.64"
[Wed Jun 27 09:30:04 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 27 09:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 27 09:30:04 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 27 09:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 27 09:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 27 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 27 09:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:41 2012] Source 13 is offset by 2.080077 and 3.621093 pixels which is larger than
2 X fitted extent = 1.665182 x 1.665182, not incorporating fit results
[Wed Jun 27 09:30:41 2012] Warning, spatial fit 4 centroid is now closest to src. 39
[Wed Jun 27 09:30:41 2012] Source 13 is offset by 2.645181 and -2.394195 pixels which is larger than
2 X fitted extent = 0.899228 x 0.899228, not incorporating fit results
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:08:54 2012] Counts = 1363.461426, rescaling region sizes by 2.000000
[Thu Jun 28 15:08:54 2012] XMMSAS src. selection expression = ellipse(24942.998718, 23163.067078, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 28 15:08:54 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (212, 192) - (362, 342)
[Thu Jun 28 15:08:54 2012] XMMSAS bgd. selection expression = annulus(24942.998718, 23163.067078, 4350.000000, 8700.000000, X, Y) && !ellipse(25959.325440, 23922.271600, 3476.904100, 3476.904100, 0.000000, X, Y) && !ellipse(21031.225200, 27649.715200, 412.080012, 412.080012, 0.000000, X, Y) && !ellipse(21933.723465, 18384.375427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.281403, 24397.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.692000, 22487.140000, 2573.984074, 2573.984074, 0.000000, X, Y) && !ellipse(26011.063600, 28712.123600, 415.878412, 415.878412, 0.000000, X, Y) && !ellipse(17066.256927, 23521.960663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33857.108246, 19971.213425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.948000, 21813.662000, 1340.560039, 1340.560039, 0.000000, X, Y) && !ellipse(19258.683100, 21311.056200, 394.979211, 394.979211, 0.000000, X, Y) && !ellipse(27578.829498, 24153.862946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.566000, 23054.836000, 1193.864034, 1193.864034, 0.000000, X, Y) && !ellipse(27861.400000, 21158.820000, 1324.040038, 1324.040038, 0.000000, X, Y) && !ellipse(24829.068756, 21363.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.358154, 22213.745422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.092529, 18062.219482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28293.706757, 22303.960663, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25177.724548, 20752.405350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.714478, 25592.596771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29277.895800, 29493.760000, 349.191210, 349.191210, 0.000000, X, Y) && !ellipse(22758.569020, 25792.313000, 355.932010, 355.932010, 0.000000, X, Y) && !ellipse(26385.895630, 20295.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19453.984512, 14512.361679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19497.399551, 17645.312180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25679.817139, 20582.888367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23532.485823, 23142.334183, 1375.528040, 719.731982, 312.830843, X, Y) && !ellipse(26673.891968, 20770.539200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.871460, 27348.168518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27862.113159, 26659.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22927.628000, 22706.352000, 1384.424040, 303.196809, 146.801000, X, Y) && !ellipse(23666.878000, 21969.072000, 1305.032038, 1305.032038, 0.000000, X, Y) && !ellipse(25472.525726, 28403.773651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.908295, 27787.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.613647, 19876.804565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.070000, 26872.170000, 1142.664033, 1142.664033, 0.000000, X, Y) && !ellipse(25435.114000, 14573.858000, 1763.160051, 1763.160051, 0.000000, X, Y) && !ellipse(24546.312000, 20380.668000, 1376.272040, 1376.272040, 0.000000, X, Y) && !ellipse(24843.968000, 27989.732000, 1197.064034, 1197.064034, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src13.gif
[Thu Jun 28 15:22:19 2012] Mean detx,y = (-353.77, 401.30) 
[Thu Jun 28 15:22:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:26:31 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:26:31 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 28 15:26:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 28 16:04:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 16:04:56 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:36 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:36 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 28 18:16:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:38 2012] Using photon index=1.80, rate=0.023, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src13.arf
[Thu Jun 28 18:16:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:38 2012] Updating source flux to 2.1e-13
[Thu Jun 28 18:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting