[Tue Jun 26 18:44:13 2012] Detection parameters:
  Position = (298.9, 276.0) = 11 55 17.98 23 24 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11588.6 +/- 132.5
  Background counts = 187.1
  Rate = 0.2 +/- 0.002

[Tue Jun 26 18:44:16 2012] Off-axis axis estimate = 1.63'
[Wed Jun 27 00:54:22 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:54:22 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed Jun 27 00:54:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Wed Jun 27 00:54:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed Jun 27 03:28:00 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 03:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 03:28:00 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 03:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 03:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 03:28:01 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 03:28:01 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 03:28:48 2012] Spatial fit model total counts = 34260.600000, observed total counts = 34278.000000
[Wed Jun 27 03:28:48 2012] Offset between fit and detection position for source 1 = 0.433977 pixels
[Wed Jun 27 03:28:48 2012] 34344.200000 total counts/ 22060.800000 bgd. counts: snr = 82.700468
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.433977 pixels
  Position = (298.9, 275.5) = 11 55 17.98 23 24 17.2
  Extent = 14.5 (14.4-29.0)", rotation angle = 0
  Source counts = 12283.4 +/- 185.3
  Background counts = 22060.8
  Rate = 0.2 +/- 0.003
[Wed Jun 27 03:28:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:48 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 03:28:48 2012] Source does appear to be extended
[Wed Jun 27 03:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 07:17:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:17:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 07:17:50 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Wed Jun 27 07:17:50 2012] source mask rpix=3.3, npix_max = 58, mask sum = 55, frac = 0.937
[Wed Jun 27 07:17:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.49"
[Wed Jun 27 09:30:04 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 27 09:30:04 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 27 09:30:04 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 09:30:05 2012] fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 09:30:05 2012] Fit fullrun_mos2_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 27 09:30:41 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Wed Jun 27 09:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:42 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:30:42 2012] Source does appear to be extended
[Wed Jun 27 09:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:30:42 2012] Source is confused with source 14
[Thu Jun 28 15:08:53 2012] Counts = 12283.400000, rescaling region sizes by 3.000000
[Thu Jun 28 15:08:53 2012] XMMSAS src. selection expression = ellipse(25959.325440, 23922.271600, 2607.678075, 2607.678075, 0.000000, X, Y)
[Thu Jun 28 15:08:53 2012] Writing source region out to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 15:08:53 2012] Extracting stamp from image fullrun_mos2_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (149, 126) - (449, 425)
[Thu Jun 28 15:08:54 2012] XMMSAS bgd. selection expression = annulus(25959.325440, 23922.271600, 13038.390375, 26076.780750, X, Y) && !ellipse(21031.225200, 27649.715200, 412.080012, 412.080012, 0.000000, X, Y) && !ellipse(34367.886400, 26266.869400, 501.117614, 501.117614, 0.000000, X, Y) && !ellipse(24942.998718, 23163.067078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21933.723465, 18384.375427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.281403, 24397.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.692000, 22487.140000, 2573.984074, 2573.984074, 0.000000, X, Y) && !ellipse(26011.063600, 28712.123600, 415.878412, 415.878412, 0.000000, X, Y) && !ellipse(29748.173400, 32357.343400, 440.808013, 440.808013, 0.000000, X, Y) && !ellipse(33358.753937, 36656.637512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17066.256927, 23521.960663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33857.108246, 19971.213425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.948000, 21813.662000, 1340.560039, 1340.560039, 0.000000, X, Y) && !ellipse(12528.438000, 32132.169400, 477.712814, 477.712814, 0.000000, X, Y) && !ellipse(19258.683100, 21311.056200, 394.979211, 394.979211, 0.000000, X, Y) && !ellipse(27578.829498, 24153.862946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.566000, 23054.836000, 1193.864034, 1193.864034, 0.000000, X, Y) && !ellipse(25223.847717, 34591.314117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34559.036926, 29971.255157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27861.400000, 21158.820000, 1324.040038, 1324.040038, 0.000000, X, Y) && !ellipse(24829.068756, 21363.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.358154, 22213.745422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.092529, 18062.219482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28293.706757, 22303.960663, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25177.724548, 20752.405350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15212.014999, 26848.765472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.714478, 25592.596771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29277.895800, 29493.760000, 349.191210, 349.191210, 0.000000, X, Y) && !ellipse(22758.569020, 25792.313000, 355.932010, 355.932010, 0.000000, X, Y) && !ellipse(26273.733917, 37899.146088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.895630, 20295.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19453.984512, 14512.361679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19497.399551, 17645.312180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25679.817139, 20582.888367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.863022, 35868.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23532.485823, 23142.334183, 1375.528040, 719.731982, 312.830843, X, Y) && !ellipse(26673.891968, 20770.539200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20009.991455, 37282.765106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14346.601562, 21081.490921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.871460, 27348.168518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.881800, 39346.923080, 450.528813, 450.528813, 0.000000, X, Y) && !ellipse(27862.113159, 26659.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22927.628000, 22706.352000, 1384.424040, 303.196809, 146.801000, X, Y) && !ellipse(23666.878000, 21969.072000, 1305.032038, 1305.032038, 0.000000, X, Y) && !ellipse(13716.105118, 17352.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25472.525726, 28403.773651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.908295, 27787.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.613647, 19876.804565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.070000, 26872.170000, 1142.664033, 1142.664033, 0.000000, X, Y) && !ellipse(25435.114000, 14573.858000, 1763.160051, 1763.160051, 0.000000, X, Y) && !ellipse(24546.312000, 20380.668000, 1376.272040, 1376.272040, 0.000000, X, Y) && !ellipse(24843.968000, 27989.732000, 1197.064034, 1197.064034, 0.000000, X, Y)
[Thu Jun 28 15:08:54 2012] Writing fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 15:09:09 2012] Mean detx,y = (414.01, 87.35) 
[Thu Jun 28 15:09:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:20:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:20:33 2012] Setting source spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 15:20:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 18:16:36 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:36 2012] Error reading totcts from fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 18:16:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:38 2012] Using photon index=1.80, rate=0.189, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 18:16:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:38 2012] Updating source flux to 1.6e-12
[Thu Jun 28 18:18:24 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jun 28 18:21:57 2012] Reading fit data from xmm0502690201/analysis//spectral/fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 28 18:21:57 2012] Spectral fit parameter nH value = 5.90733e+20
[Thu Jun 28 18:21:57 2012] Spectral fit parameter PhoIndex value = 1.74706
[Thu Jun 28 18:21:57 2012] Failed to get F(0.3-8.0) from xmm0502690201/analysis//spectral/fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 18:21:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:21:57 2012] Using Nh = 5.9e+20, photon index=1.75, rate=0.189, arf fullrun_mos2_xmm0502690201_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 18:21:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:21:57 2012] Updating source flux to 1.8e-12