[Tue Jun 26 18:43:34 2012] Detection parameters:
  Position = (288.9, 237.3) = 11 55 21.14 23 21 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.7 +/- 24.8
  Background counts = 123.0
  Rate = 0.003 +/- 0.0004

[Tue Jun 26 18:43:35 2012] Off-axis axis estimate = 4.49'
[Tue Jun 26 22:18:00 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 22:18:00 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Tue Jun 26 22:18:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Tue Jun 26 22:18:00 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.67"
[Wed Jun 27 00:54:20 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun 27 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src25.csv
[Wed Jun 27 00:54:20 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun 27 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src25.csv
[Wed Jun 27 00:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun 27 00:54:21 2012] Fit fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Jun 27 03:28:37 2012] Source 57 is offset by 4.162312 and 1.679574 pixels which is larger than
2 X fitted extent = 0.996897 x 0.996897, not incorporating fit results
[Wed Jun 27 03:28:37 2012] Source 57 is offset by 4.168565 and 1.643321 pixels which is larger than
2 X fitted extent = 0.986869 x 0.986869, not incorporating fit results
[Wed Jun 27 03:28:37 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:37 2012] Assessing source extent using major
[Wed Jun 27 03:28:37 2012] Source does appear to be extended
[Wed Jun 27 03:28:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 06:01:25 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:01:25 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Wed Jun 27 06:01:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Wed Jun 27 06:01:25 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.67"
[Wed Jun 27 07:17:48 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jun 27 07:17:48 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jun 27 07:17:48 2012] Fit fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src24 appears to have run properly
[Wed Jun 27 07:17:49 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jun 27 07:17:49 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jun 27 07:17:49 2012] Fit fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Wed Jun 27 09:30:31 2012] Source 57 is offset by 4.184404 and 1.690632 pixels which is larger than
2 X fitted extent = 0.996897 x 0.996897, not incorporating fit results
[Wed Jun 27 09:30:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:31 2012] Assessing source extent using major
[Wed Jun 27 09:30:31 2012] Source does appear to be extended
[Wed Jun 27 09:30:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 12:44:26 2012] XMMSAS src. selection expression = ellipse(25089.073120, 20592.638962, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 12:44:26 2012] Writing source region out to fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src57_src.reg
[Thu Jun 28 12:44:26 2012] Extracting stamp from image fullrun_mos1_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (251, 200) - (326, 275)
[Thu Jun 28 12:44:26 2012] XMMSAS bgd. selection expression = annulus(25089.073120, 20592.638962, 1087.500000, 2175.000000, X, Y) && !ellipse(25957.771000, 23898.956000, 3476.616100, 3476.616100, 0.000000, X, Y) && !ellipse(26304.242859, 22190.746231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24284.612000, 22535.520000, 1312.944038, 1312.944038, 0.000000, X, Y) && !ellipse(27516.332764, 22785.306854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25940.381714, 20845.748215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.364000, 22109.128000, 1272.744037, 1272.744037, 0.000000, X, Y) && !ellipse(28084.519653, 23051.327515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.358856, 20867.161026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.002869, 22404.769470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22959.476776, 22769.302338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.744000, 21351.386000, 1323.744038, 1323.744038, 0.000000, X, Y)
[Thu Jun 28 12:44:26 2012] Writing fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src57.gif
[Thu Jun 28 13:11:23 2012] Mean detx,y = (3022.07, 1621.62) 
[Thu Jun 28 13:11:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 13:11:38 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 13:11:39 2012] Setting source spectrum file to fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Jun 28 13:11:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Thu Jun 28 14:49:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 14:49:53 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:35 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:35 2012] Error reading totcts from fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Jun 28 18:16:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:36 2012] Using photon index=1.80, rate=0.00336, arf fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src57.arf
[Thu Jun 28 18:16:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:36 2012] Updating source flux to 3.4e-14
[Thu Jun 28 18:16:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting