[Tue Jun 26 18:43:34 2012] Detection parameters:
  Position = (387.3, 272.3) = 11 54 50.07 23 24 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 11.8
  Background counts = 26.7
  Rate = 0.002 +/- 0.0003

[Tue Jun 26 18:43:35 2012] Off-axis axis estimate = 6.71'
[Tue Jun 26 22:18:00 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 22:18:00 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Tue Jun 26 22:18:00 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.827
[Tue Jun 26 22:18:01 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 9.78"
[Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src49.ximg exists
[Wed Jun 27 00:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src49.csv
[Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src49_1.ximg exists
[Wed Jun 27 00:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src49.csv
[Wed Jun 27 00:54:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 00:54:22 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Wed Jun 27 00:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src49.csv
[Wed Jun 27 00:54:22 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Wed Jun 27 00:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src49.csv
[Wed Jun 27 00:54:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:37 2012] Spatial fit model total counts = 398.044000, observed total counts = 285.000000
[Wed Jun 27 03:28:37 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 03:28:37 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:37 2012] Assessing source extent using major
[Wed Jun 27 03:28:37 2012] Source does appear to be extended
[Wed Jun 27 03:28:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 03:28:37 2012] Deleting source due to low Poisson probability 0.8