[Tue Jun 26 18:43:33 2012] Detection parameters: Position = (322.7, 369.8) = 11 55 10.46 23 31 8.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 61.7 +/- 12.2 Background counts = 38.0 Rate = 0.002 +/- 0.0003 [Tue Jun 26 18:43:35 2012] Off-axis axis estimate = 5.47' [Tue Jun 26 22:18:00 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting [Tue Jun 26 22:18:00 2012] Initial guess for spatial extent in simple fitting = 9.16" [Tue Jun 26 22:18:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.920 [Tue Jun 26 22:18:00 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 9.16" [Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src46.ximg exists [Wed Jun 27 00:54:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src46.csv [Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src46_1.ximg exists [Wed Jun 27 00:54:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src46.csv [Wed Jun 27 00:54:21 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src46_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 27 00:54:22 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists [Wed Jun 27 00:54:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src46.csv [Wed Jun 27 00:54:22 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists [Wed Jun 27 00:54:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src46.csv [Wed Jun 27 00:54:22 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 27 03:28:37 2012] Spatial fit model total counts = -29.875200, observed total counts = 249.000000 [Wed Jun 27 03:28:37 2012] Poor agreement between spatial fit and data for source 30 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 27 03:28:37 2012] Vigneting correction estimate = 1.000000 [Wed Jun 27 03:28:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 27 03:28:37 2012] Assessing source extent using major [Wed Jun 27 03:28:37 2012] Source does appear to be extended [Wed Jun 27 03:28:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 27 03:28:37 2012] Deleting source due to low Poisson probability 0.9