[Tue Jun 26 18:43:33 2012] Detection parameters:
  Position = (242.4, 318.2) = 11 55 35.87 23 27 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3035.3 +/- 66.8
  Background counts = 58.8
  Rate = 0.06 +/- 0.001

[Tue Jun 26 18:43:35 2012] Off-axis axis estimate = 4.31'
[Tue Jun 26 22:18:00 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 22:18:00 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Tue Jun 26 22:18:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Tue Jun 26 22:18:00 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.58"
[Wed Jun 27 00:54:20 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 27 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 00:54:20 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 27 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 00:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 27 00:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 27 00:54:21 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 27 00:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 27 00:54:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 03:28:37 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.486400 pixels away
[Wed Jun 27 03:28:37 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 03:28:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 03:28:37 2012] Assessing source extent using major
[Wed Jun 27 03:28:37 2012] Source does appear to be extended
[Wed Jun 27 03:28:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 06:01:25 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:01:25 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Wed Jun 27 06:01:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Wed Jun 27 06:01:25 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.58"
[Wed Jun 27 07:17:48 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 27 07:17:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src2.csv
[Wed Jun 27 07:17:48 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 27 07:17:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src2.csv
[Wed Jun 27 07:17:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 07:17:49 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 27 07:17:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 27 07:17:49 2012] fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 27 07:17:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 27 07:17:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:30:31 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.970022 pixels away
[Wed Jun 27 09:30:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:30:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:30:31 2012] Assessing source extent using major
[Wed Jun 27 09:30:31 2012] Source does appear to be extended
[Wed Jun 27 09:30:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 12:44:25 2012] Counts = 3035.264404, rescaling region sizes by 2.000000
[Thu Jun 28 12:44:26 2012] XMMSAS src. selection expression = ellipse(21036.757660, 27636.926849, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 28 12:44:26 2012] Writing source region out to fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 28 12:44:26 2012] Extracting stamp from image fullrun_mos1_xmm0502690201_pi300-10000_cl_sm2.00.img.gz, (167, 243) - (317, 393)
[Thu Jun 28 12:44:26 2012] XMMSAS bgd. selection expression = annulus(21036.757660, 27636.926849, 4350.000000, 8700.000000, X, Y) && !ellipse(25957.771000, 23898.956000, 3476.616100, 3476.616100, 0.000000, X, Y) && !ellipse(21950.581573, 18472.716217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.334420, 24432.005800, 311.604009, 311.604009, 0.000000, X, Y) && !ellipse(26304.242859, 22190.746231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.388000, 28708.560000, 365.748811, 365.748811, 0.000000, X, Y) && !ellipse(17048.814713, 23541.225555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29767.914429, 32336.798645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12497.251526, 32077.657166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15210.386139, 26578.010895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24284.612000, 22535.520000, 1312.944038, 1312.944038, 0.000000, X, Y) && !ellipse(27516.332764, 22785.306854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25940.381714, 20845.748215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.364000, 22109.128000, 1272.744037, 1272.744037, 0.000000, X, Y) && !ellipse(19290.268768, 21290.032852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.258026, 26827.655334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25089.073120, 20592.638962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.519653, 23051.327515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.790405, 29474.443420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.112335, 27278.309387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.358856, 20867.161026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26065.006134, 27767.060455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.002869, 22404.769470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22959.476776, 22769.302338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.426000, 28367.194000, 1151.392033, 1151.392033, 0.000000, X, Y) && !ellipse(27697.744000, 21351.386000, 1323.744038, 1323.744038, 0.000000, X, Y)
[Thu Jun 28 12:44:26 2012] Writing fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src2.gif
[Thu Jun 28 12:56:35 2012] Mean detx,y = (-5022.12, 2284.46) 
[Thu Jun 28 12:56:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 12:58:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 12:58:07 2012] Setting source spectrum file to fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 28 12:58:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 28 14:17:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 14:17:10 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:16:35 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:16:35 2012] Error reading totcts from fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 28 18:16:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:16:35 2012] Using photon index=1.80, rate=0.057, arf fullrun_mos1_xmm0502690201_pi300-10000_pass1_cl_src2.arf
[Thu Jun 28 18:16:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:16:35 2012] Updating source flux to 5.9e-13
[Thu Jun 28 18:16:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting