[Mon Mar  5 15:52:16 2012] Detection parameters:
  Position = (304.7, 262.7) = 11 55 16.48 23 23 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2894.4 +/- 68.8
  Background counts = 304.4
  Rate = 0.08 +/- 0.002

[Mon Mar  5 15:52:18 2012] Off-axis axis estimate = 2.63'
[Mon Mar  5 15:56:09 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 15:56:09 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Mar  5 15:56:09 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.106
[Mon Mar  5 15:56:09 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.75"
[Mon Mar  5 18:10:28 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Mar  5 18:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src2.csv
[Mon Mar  5 18:10:28 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Mar  5 18:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src2.csv
[Mon Mar  5 18:10:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 18:10:29 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Mar  5 18:10:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar  5 18:10:29 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Mar  5 18:10:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar  5 18:10:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 19:49:48 2012] Source 3 is offset by 3.968173 and -7.932619 pixels which is larger than
2 X fitted extent = 7.122161 x 7.122161, not incorporating fit results
[Mon Mar  5 19:49:49 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 19:49:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 19:49:49 2012] Assessing source extent using major
[Mon Mar  5 19:49:49 2012] Source does appear to be extended
[Mon Mar  5 19:49:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 19:50:10 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 19:50:10 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Mar  5 19:50:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.106
[Mon Mar  5 19:50:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.75"
[Mon Mar  5 21:41:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Mar  5 21:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src2.csv
[Mon Mar  5 21:41:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Mar  5 21:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src2.csv
[Mon Mar  5 21:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 21:41:31 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Mar  5 21:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Mar  5 21:41:31 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Mar  5 21:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Mar  5 21:41:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 22:48:03 2012] Source 3 is offset by 3.956035 and -7.936918 pixels which is larger than
2 X fitted extent = 7.122161 x 7.122161, not incorporating fit results
[Mon Mar  5 22:48:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 22:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 22:48:03 2012] Assessing source extent using major
[Mon Mar  5 22:48:03 2012] Source does appear to be extended
[Mon Mar  5 22:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 22:48:03 2012] Source is confused with source 1
[Mon Mar  5 22:48:19 2012] Counts = 2894.389893, rescaling region sizes by 2.000000
[Mon Mar  5 22:48:19 2012] XMMSAS src. selection expression = ellipse(26462.541016, 22802.960144, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Mar  5 22:48:19 2012] Writing source region out to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3_src.reg
[Mon Mar  5 22:48:19 2012] Extracting stamp from image fullrun_pn_xmm0502690101_pi300-10000_cl_sm2.00.img.gz, (230, 188) - (380, 338)
[Mon Mar  5 22:48:19 2012] XMMSAS bgd. selection expression = annulus(26462.541016, 22802.960144, 4350.000000, 8700.000000, X, Y) && !ellipse(26048.045200, 23890.249400, 5485.656158, 5485.656158, 0.000000, X, Y) && !ellipse(33925.223400, 19936.670600, 438.614413, 438.614413, 0.000000, X, Y) && !ellipse(22058.989157, 18344.845811, 481.373702, 393.706553, 6.265598, X, Y) && !ellipse(21129.479800, 27622.375400, 454.910413, 454.910413, 0.000000, X, Y) && !ellipse(25701.516693, 22243.996826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.852264, 32338.277496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34645.333344, 29950.914978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.661407, 28672.048431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26100.955231, 28012.953339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34476.364624, 26226.625732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.907200, 24416.633800, 347.610410, 347.610410, 0.000000, X, Y) && !ellipse(18159.278061, 24490.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17086.700653, 23270.558594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19382.002686, 21288.092026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25353.546000, 26639.368000, 2217.264064, 2217.264064, 0.000000, X, Y) && !ellipse(27943.112793, 25556.615814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17233.223755, 23726.504120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24023.870056, 22164.182663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33770.405609, 18051.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.070923, 29966.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29407.727844, 29461.473602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.665253, 27957.051697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.720000, 27736.816000, 1108.632032, 1108.632032, 0.000000, X, Y) && !ellipse(27286.147034, 27425.968842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.740967, 26704.608002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.128876, 26399.160156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26736.415253, 15259.796234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.119629, 25103.797913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33705.498108, 23617.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28374.515228, 23511.088318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28297.776917, 22921.847046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.495972, 22049.878342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.220000, 22504.956000, 1280.568037, 1280.568037, 0.000000, X, Y) && !ellipse(28042.097595, 21445.632172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.700378, 20777.352005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.247772, 20413.231995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.291748, 19982.774750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26304.893341, 19965.745392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35005.253600, 18288.426800, 840.248024, 840.248024, 0.000000, X, Y) && !ellipse(29992.981262, 16621.633774, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 22:48:19 2012] Writing fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3.gif
[Mon Mar  5 22:54:24 2012] Mean detx,y = (41.92, -953.24) 
[Mon Mar  5 22:54:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 22:55:40 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 22:55:40 2012] Setting source spectrum file to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar  5 22:55:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar  8 00:22:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar  8 00:22:19 2012] rmf not generated due to insufficient counts
[Thu Mar  8 08:14:00 2012] Updating aperture counts using extracted products
[Thu Mar  8 08:14:00 2012] Error reading totcts from fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar  8 08:14:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 08:14:01 2012] Using photon index=1.80, rate=0.0838, arf fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3.arf
[Thu Mar  8 08:14:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 08:14:02 2012] Updating source flux to 2.1e-13
[Thu Mar  8 08:16:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Mar  8 08:17:26 2012] xmm0502690101/analysis//spectral/fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete