[Mon Mar  5 15:52:16 2012] Detection parameters:
  Position = (294.9, 311.8) = 11 55 19.57 23 26 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.4 +/- 34.8
  Background counts = 237.5
  Rate = 0.01 +/- 0.0009

[Mon Mar  5 15:52:18 2012] Off-axis axis estimate = 1.00'
[Mon Mar  5 15:56:09 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 15:56:09 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Mon Mar  5 15:56:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Mon Mar  5 15:56:09 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 6.93"
[Mon Mar  5 18:10:28 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Mar  5 18:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src21.csv
[Mon Mar  5 18:10:28 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Mar  5 18:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src21.csv
[Mon Mar  5 18:10:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 18:10:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Mar  5 18:10:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Mar  5 18:10:30 2012] Fit fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Mar  5 19:49:49 2012] Warning, spatial fit 21 centroid is now closest to src. 40
[Mon Mar  5 19:49:49 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 19:49:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 19:49:49 2012] Assessing source extent using major
[Mon Mar  5 19:49:49 2012] Source does appear to be extended
[Mon Mar  5 19:49:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 19:49:49 2012] Source is confused with source 40
[Mon Mar  5 19:50:10 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 19:50:10 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Mon Mar  5 19:50:10 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Mon Mar  5 19:50:10 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 6.93"
[Mon Mar  5 21:41:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Mar  5 21:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src21.csv
[Mon Mar  5 21:41:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Mar  5 21:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src21.csv
[Mon Mar  5 21:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 21:41:31 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Mar  5 21:41:31 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Mar  5 21:41:31 2012] Fit fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Mar  5 22:48:03 2012] Warning, spatial fit 21 centroid is now closest to src. 40
[Mon Mar  5 22:48:03 2012] Spatial fit model total counts = 3109.050000, observed total counts = 2919.000000
[Mon Mar  5 22:48:03 2012] Offset between fit and detection position for source 24 = 5.839770 pixels
[Mon Mar  5 22:48:03 2012] Warning, changing simple spatial fit ID from 21 to 35
[Mon Mar  5 22:48:03 2012] 2956.241000 total counts/ 2389.600000 bgd. counts: snr = 11.591653
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.839770 pixels
  Position = (292.0, 306.8) = 11 55 20.51 23 26 34.7
  Extent = 27.7 (27.7-55.4)", rotation angle = 0
  Source counts = 566.6 +/- 54.4
  Background counts = 2389.6
  Rate = 0.02 +/- 0.002
[Mon Mar  5 22:48:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 22:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 22:48:03 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 22:48:03 2012] Source does appear to be extended
[Mon Mar  5 22:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 22:48:19 2012] XMMSAS src. selection expression = ellipse(25353.546000, 26639.368000, 1662.948048, 1662.948048, 0.000000, X, Y)
[Mon Mar  5 22:48:19 2012] Writing source region out to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src24_src.reg
[Mon Mar  5 22:48:19 2012] Extracting stamp from image fullrun_pn_xmm0502690101_pi300-10000_cl_sm2.00.img.gz, (196, 211) - (388, 402)
[Mon Mar  5 22:48:20 2012] XMMSAS bgd. selection expression = annulus(25353.546000, 26639.368000, 2771.580080, 5543.160160, X, Y) && !ellipse(26048.045200, 23890.249400, 5485.656158, 5485.656158, 0.000000, X, Y) && !ellipse(26462.541016, 22802.960144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21129.479800, 27622.375400, 454.910413, 454.910413, 0.000000, X, Y) && !ellipse(25701.516693, 22243.996826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.852264, 32338.277496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.661407, 28672.048431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26100.955231, 28012.953339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.907200, 24416.633800, 347.610410, 347.610410, 0.000000, X, Y) && !ellipse(19382.002686, 21288.092026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27943.112793, 25556.615814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24023.870056, 22164.182663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.070923, 29966.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29407.727844, 29461.473602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.665253, 27957.051697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.720000, 27736.816000, 1108.632032, 1108.632032, 0.000000, X, Y) && !ellipse(27286.147034, 27425.968842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.740967, 26704.608002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.128876, 26399.160156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.119629, 25103.797913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28374.515228, 23511.088318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28297.776917, 22921.847046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.495972, 22049.878342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.220000, 22504.956000, 1280.568037, 1280.568037, 0.000000, X, Y) && !ellipse(28042.097595, 21445.632172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.700378, 20777.352005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.247772, 20413.231995, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 22:48:20 2012] Writing fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src24.gif
[Mon Mar  5 23:11:14 2012] Mean detx,y = (-797.70, 1805.02) 
[Mon Mar  5 23:11:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 23:11:45 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 23:11:46 2012] Setting source spectrum file to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar  5 23:11:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Mar  8 08:14:01 2012] Updating aperture counts using extracted products
[Thu Mar  8 08:14:01 2012] Error reading totcts from fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Mar  8 08:14:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 08:14:02 2012] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src24.arf
[Thu Mar  8 08:14:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 08:14:02 2012] Updating source flux to 4.2e-14
[Thu Mar  8 08:16:29 2012] Flag c found in src. 24 procflags, skipping spectral fitting