[Mon Mar  5 15:52:16 2012] Detection parameters:
  Position = (223.3, 245.2) = 11 55 42.19 23 22 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1291.2 +/- 46.1
  Background counts = 96.1
  Rate = 0.04 +/- 0.001

[Mon Mar  5 15:52:18 2012] Off-axis axis estimate = 6.67'
[Mon Mar  5 15:56:09 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 15:56:09 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Mon Mar  5 15:56:09 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.830
[Mon Mar  5 15:56:09 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.76"
[Mon Mar  5 18:10:28 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src15.ximg exists
[Mon Mar  5 18:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src15.csv
[Mon Mar  5 18:10:28 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Mar  5 18:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src15.csv
[Mon Mar  5 18:10:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 18:10:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Mar  5 18:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Mar  5 18:10:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Mar  5 18:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Mar  5 18:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 19:49:48 2012] Warning, spatial fit 15 centroid is now closest to src. 52
[Mon Mar  5 19:49:49 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 19:49:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 19:49:49 2012] Assessing source extent using major
[Mon Mar  5 19:49:49 2012] Source does appear to be extended
[Mon Mar  5 19:49:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 19:50:10 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 19:50:10 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Mon Mar  5 19:50:10 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.830
[Mon Mar  5 19:50:10 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.76"
[Mon Mar  5 21:41:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src15.ximg exists
[Mon Mar  5 21:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src15.csv
[Mon Mar  5 21:41:30 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Mar  5 21:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src15.csv
[Mon Mar  5 21:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 21:41:31 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Mar  5 21:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon Mar  5 21:41:31 2012] fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Mar  5 21:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon Mar  5 21:41:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 22:48:03 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.430145 pixels away
[Mon Mar  5 22:48:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 22:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 22:48:03 2012] Assessing source extent using major
[Mon Mar  5 22:48:03 2012] Source does appear to be extended
[Mon Mar  5 22:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 22:48:19 2012] Counts = 1291.190552, rescaling region sizes by 2.000000
[Mon Mar  5 22:48:19 2012] XMMSAS src. selection expression = ellipse(19382.002686, 21288.092026, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Mar  5 22:48:19 2012] Writing source region out to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src18_src.reg
[Mon Mar  5 22:48:19 2012] Extracting stamp from image fullrun_pn_xmm0502690101_pi300-10000_cl_sm2.00.img.gz, (148, 170) - (298, 320)
[Mon Mar  5 22:48:19 2012] XMMSAS bgd. selection expression = annulus(19382.002686, 21288.092026, 4350.000000, 8700.000000, X, Y) && !ellipse(26048.045200, 23890.249400, 5485.656158, 5485.656158, 0.000000, X, Y) && !ellipse(15480.998672, 26330.623230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.541016, 22802.960144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22058.989157, 18344.845811, 481.373702, 393.706553, 6.265598, X, Y) && !ellipse(21129.479800, 27622.375400, 454.910413, 454.910413, 0.000000, X, Y) && !ellipse(25701.516693, 22243.996826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.661407, 28672.048431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26100.955231, 28012.953339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.907200, 24416.633800, 347.610410, 347.610410, 0.000000, X, Y) && !ellipse(18159.278061, 24490.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17086.700653, 23270.558594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25353.546000, 26639.368000, 2217.264064, 2217.264064, 0.000000, X, Y) && !ellipse(27943.112793, 25556.615814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17233.223755, 23726.504120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24023.870056, 22164.182663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13789.893692, 17372.482697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.070923, 29966.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16014.086075, 29565.508270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.665253, 27957.051697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.720000, 27736.816000, 1108.632032, 1108.632032, 0.000000, X, Y) && !ellipse(27286.147034, 27425.968842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.740967, 26704.608002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.128876, 26399.160156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26736.415253, 15259.796234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.119629, 25103.797913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28374.515228, 23511.088318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28297.776917, 22921.847046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.495972, 22049.878342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.220000, 22504.956000, 1280.568037, 1280.568037, 0.000000, X, Y) && !ellipse(28042.097595, 21445.632172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.700378, 20777.352005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.247772, 20413.231995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.291748, 19982.774750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26304.893341, 19965.745392, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 22:48:19 2012] Writing fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src18.gif
[Mon Mar  5 23:07:51 2012] Mean detx,y = (6830.02, 930.91) 
[Mon Mar  5 23:07:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 23:09:13 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 23:09:13 2012] Setting source spectrum file to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Mar  5 23:09:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Mar  8 01:51:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar  8 01:51:34 2012] rmf not generated due to insufficient counts
[Thu Mar  8 08:14:00 2012] Updating aperture counts using extracted products
[Thu Mar  8 08:14:00 2012] Error reading totcts from fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar  8 08:14:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 08:14:02 2012] Using photon index=1.80, rate=0.0385, arf fullrun_pn_xmm0502690101_pi300-10000_pass1_cl_src18.arf
[Thu Mar  8 08:14:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 08:14:02 2012] Updating source flux to 1.1e-13
[Thu Mar  8 08:16:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting