[Mon Mar  5 15:52:49 2012] Detection parameters:
  Position = (408.9, 319.9) = 11 54 43.55 23 27 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 16.1
  Background counts = 75.0
  Rate = 0.001 +/- 0.0003

[Mon Mar  5 15:52:50 2012] Off-axis axis estimate = 8.16'
[Mon Mar  5 18:10:30 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 18:10:30 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Mon Mar  5 18:10:30 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.059
[Mon Mar  5 18:10:30 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 10.51"
[Mon Mar  5 19:39:37 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src46.ximg exists
[Mon Mar  5 19:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src46.csv
[Mon Mar  5 19:39:37 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src46_1.ximg exists
[Mon Mar  5 19:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src46.csv
[Mon Mar  5 19:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 19:39:38 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Mon Mar  5 19:39:38 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Mar  5 19:39:38 2012] Fit fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Mon Mar  5 19:49:58 2012] Spatial fit model total counts = 302.900000, observed total counts = 305.000000
[Mon Mar  5 19:49:58 2012] Offset between fit and detection position for source 24 = 1.132378 pixels
[Mon Mar  5 19:49:58 2012] Warning, changing simple spatial fit ID from 46 to 26
[Mon Mar  5 19:49:58 2012] 295.780700 total counts/ 282.427000 bgd. counts: snr = 0.794600
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.132378 pixels
  Position = (407.8, 320.4) = 11 54 43.89 23 27 33.6
  Extent = 2.6 (2.6-11.4)", rotation angle = 0
  Source counts = 13.4 +/- 17.2
  Background counts = 282.4
  Rate = 0.0003 +/- 0.0004
  Deleting source due to low Poisson probability