[Mon Mar  5 15:52:48 2012] Detection parameters:
  Position = (390.4, 229.8) = 11 54 49.43 23 20 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1034.1 +/- 41.5
  Background counts = 81.8
  Rate = 0.03 +/- 0.001

[Mon Mar  5 15:52:50 2012] Off-axis axis estimate = 8.32'
[Mon Mar  5 18:10:30 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 18:10:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar  5 18:10:30 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Mon Mar  5 18:10:30 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Mon Mar  5 18:10:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.59"
[Mon Mar  5 19:39:36 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Mar  5 19:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src3.csv
[Mon Mar  5 19:39:36 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Mar  5 19:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src3.csv
[Mon Mar  5 19:39:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 19:39:37 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Mar  5 19:39:37 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Mar  5 19:39:37 2012] Fit fullrun_mos1_xmm0502690101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Mar  5 19:49:58 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.675287 pixels away
[Mon Mar  5 19:49:58 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 19:49:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 19:49:58 2012] Assessing source extent using major
[Mon Mar  5 19:49:58 2012] Source does appear to be extended
[Mon Mar  5 19:49:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 21:41:32 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 21:41:32 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Mon Mar  5 21:41:32 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Mon Mar  5 21:41:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.59"
[Mon Mar  5 22:37:12 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Mar  5 22:37:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_src3.csv
[Mon Mar  5 22:37:12 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Mar  5 22:37:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_src3.csv
[Mon Mar  5 22:37:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 22:37:13 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Mar  5 22:37:13 2012] fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Mar  5 22:37:13 2012] Fit fullrun_mos1_xmm0502690101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Mar  5 22:48:08 2012] Spatial fit model total counts = 1041.000000, observed total counts = 1041.000000
[Mon Mar  5 22:48:08 2012] Offset between fit and detection position for source 2 = 0.235888 pixels
[Mon Mar  5 22:48:08 2012] 1042.838000 total counts/ 426.135000 bgd. counts: snr = 29.874625
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.235888 pixels
  Position = (390.2, 229.6) = 11 54 49.47 23 20 59.0
  Extent = 6.4 (6.0-6.9)", rotation angle = 0
  Source counts = 616.7 +/- 32.3
  Background counts = 426.1
  Rate = 0.01 +/- 0.0007
[Mon Mar  5 22:48:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 22:48:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 22:48:08 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 22:48:08 2012] Source does appear to be extended
[Mon Mar  5 22:48:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 02:19:55 2012] XMMSAS src. selection expression = ellipse(33903.215200, 19928.855000, 385.080611, 385.080611, 0.000000, X, Y)
[Thu Mar  8 02:19:56 2012] Writing source region out to fullrun_mos1_xmm0502690101_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar  8 02:19:56 2012] Extracting stamp from image fullrun_mos1_xmm0502690101_pi300-10000_cl_sm2.00.img.gz, (368, 207) - (412, 252)
[Thu Mar  8 02:19:56 2012] XMMSAS bgd. selection expression = annulus(33903.215200, 19928.855000, 641.801018, 1283.602037, X, Y) && !ellipse(33814.425995, 18056.354523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35229.917694, 21137.846573, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar  8 02:19:56 2012] Writing fullrun_mos1_xmm0502690101_pi300-10000_pass1_cl_src2.gif
[Thu Mar  8 02:24:58 2012] Mean detx,y = (7852.83, -5101.59) 
[Thu Mar  8 02:25:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 02:25:22 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 02:25:23 2012] Setting source spectrum file to fullrun_mos1_xmm0502690101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 02:25:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502690101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar  8 08:14:02 2012] Updating aperture counts using extracted products
[Thu Mar  8 08:14:03 2012] Error reading totcts from fullrun_mos1_xmm0502690101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 08:14:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 08:14:03 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos1_xmm0502690101_pi300-10000_pass1_cl_src2.arf
[Thu Mar  8 08:14:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 08:14:03 2012] Updating source flux to 2.5e-13