[Tue Mar  6 10:30:51 2012] Detection parameters:
  Position = (212.9, 102.8) = 15 43 37.59 -83 48 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.3 +/- 25.5
  Background counts = 62.8
  Rate = 0.02 +/- 0.001

[Tue Mar  6 10:30:51 2012] Off-axis axis estimate = 15.48'
[Tue Mar  6 11:28:17 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 11:28:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 11:28:17 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Tue Mar  6 11:28:17 2012] source mask rpix=3.3, npix_max = 56, mask sum = 40, frac = 0.708
[Tue Mar  6 11:28:17 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 14.17"
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar  6 11:44:22 2012] Fit fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_src4 appears to have run properly
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar  6 11:44:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar  6 11:44:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Mar  6 11:44:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 11:44:33 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.625896 pixels away
[Tue Mar  6 11:44:33 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 11:44:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 11:44:33 2012] Assessing source extent using major
[Tue Mar  6 11:44:33 2012] Source does appear to be extended
[Tue Mar  6 11:44:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 12:18:22 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 12:18:22 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Tue Mar  6 12:18:22 2012] source mask rpix=3.3, npix_max = 56, mask sum = 40, frac = 0.708
[Tue Mar  6 12:18:22 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.17"
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src4.csv
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src4.csv
[Tue Mar  6 12:34:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar  6 12:34:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 12:34:45 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 18.570470 pixels away
[Tue Mar  6 12:34:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 12:34:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 12:34:45 2012] Assessing source extent using major
[Tue Mar  6 12:34:45 2012] Source does appear to be extended
[Tue Mar  6 12:34:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 05:14:38 2012] XMMSAS src. selection expression = ellipse(18473.905670, 8896.200775, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 05:14:38 2012] Writing source region out to fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src6_src.reg
[Wed Mar  7 05:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0502671101_pi300-10000_cl_sm2.00.img.gz, (175, 65) - (250, 140)
[Wed Mar  7 05:14:38 2012] XMMSAS bgd. selection expression = annulus(18473.905670, 8896.200775, 1087.500000, 2175.000000, X, Y)
[Wed Mar  7 05:14:38 2012] Writing fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src6.gif
[Wed Mar  7 05:20:26 2012] Mean detx,y = (-15989.98, 5091.14) 
[Wed Mar  7 05:20:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 05:20:44 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 05:20:45 2012] Setting source spectrum file to fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar  7 05:20:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Mar  7 05:31:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar  7 05:31:57 2012] rmf not generated due to insufficient counts
[Wed Mar  7 05:32:44 2012] Updating aperture counts using extracted products
[Wed Mar  7 05:32:44 2012] Error reading totcts from fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar  7 05:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 05:32:44 2012] Using photon index=1.80, rate=0.0193, arf fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src6.arf
[Wed Mar  7 05:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 05:32:44 2012] Updating source flux to 1.3e-12
[Wed Mar  7 05:33:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting