[Tue Mar  6 10:30:51 2012] Detection parameters:
  Position = (302.9, 278.0) = 15 39 36.13 -83 35 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5541.3 +/- 93.4
  Background counts = 184.0
  Rate = 0.3 +/- 0.005

[Tue Mar  6 10:30:51 2012] Off-axis axis estimate = 1.52'
[Tue Mar  6 11:28:17 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 11:28:17 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Mar  6 11:28:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Tue Mar  6 11:28:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar  6 11:44:22 2012] Fit fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar  6 11:44:22 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar  6 11:44:22 2012] Fit fullrun_mos2_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar  6 11:44:33 2012] Spatial fit model total counts = 16792.900000, observed total counts = 16327.000000
[Tue Mar  6 11:44:33 2012] Offset between fit and detection position for source 1 = 0.640487 pixels
[Tue Mar  6 11:44:33 2012] 16949.040000 total counts/ 10723.800000 bgd. counts: snr = 60.114847
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.640487 pixels
  Position = (303.6, 278.1) = 15 39 34.49 -83 35 23.1
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source counts = 6225.2 +/- 130.2
  Background counts = 10723.8
  Rate = 0.3 +/- 0.007
[Tue Mar  6 11:44:33 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 11:44:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 11:44:33 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 11:44:33 2012] Source does appear to be extended
[Tue Mar  6 11:44:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 12:18:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 12:18:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 12:18:22 2012] Initial guess for spatial extent in simple fitting = 14.38"
[Tue Mar  6 12:18:22 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.967
[Tue Mar  6 12:18:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.38"
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 12:34:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 12:34:39 2012] fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar  6 12:34:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 12:34:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 12:34:45 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Tue Mar  6 12:34:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 12:34:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 12:34:45 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 12:34:45 2012] Source does appear to be extended
[Tue Mar  6 12:34:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 05:14:38 2012] Counts = 6225.240000, rescaling region sizes by 2.000000
[Wed Mar  7 05:14:38 2012] XMMSAS src. selection expression = ellipse(26363.372800, 24143.471600, 1725.072050, 1725.072050, 0.000000, X, Y)
[Wed Mar  7 05:14:38 2012] Writing source region out to fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 05:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0502671101_pi300-10000_cl_sm2.00.img.gz, (204, 179) - (403, 377)
[Wed Mar  7 05:14:38 2012] XMMSAS bgd. selection expression = annulus(26363.372800, 24143.471600, 5750.240165, 11500.480331, X, Y) && !ellipse(25473.784210, 23510.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.468475, 23159.594299, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 05:14:38 2012] Writing fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 05:14:47 2012] Mean detx,y = (210.95, -74.72) 
[Wed Mar  7 05:14:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 05:19:31 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 05:19:31 2012] Setting source spectrum file to fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 05:19:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 05:32:44 2012] Updating aperture counts using extracted products
[Wed Mar  7 05:32:44 2012] Error reading totcts from fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 05:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 05:32:44 2012] Using photon index=1.80, rate=0.345, arf fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 05:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 05:32:44 2012] Updating source flux to 3.4e-12
[Wed Mar  7 05:33:15 2012] Reading fit data from xmm0502671101/analysis//spectral/fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 05:33:15 2012] Spectral fit parameter nH value = 3.4273e+21
[Wed Mar  7 05:33:15 2012] Spectral fit parameter PhoIndex value = 2.46305
[Wed Mar  7 05:33:15 2012] Failed to get F(0.3-8.0) from xmm0502671101/analysis//spectral/fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 05:33:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 05:33:15 2012] Using Nh = 3.4e+21, photon index=2.46, rate=0.345, arf fullrun_mos2_xmm0502671101_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 05:33:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 05:33:15 2012] Updating source flux to 3.3e-12