[Tue Mar  6 10:30:29 2012] Detection parameters:
  Position = (302.2, 278.1) = 15 39 37.97 -83 35 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5493.2 +/- 94.7
  Background counts = 207.7
  Rate = 0.3 +/- 0.005

[Tue Mar  6 10:30:29 2012] Off-axis axis estimate = 1.50'
[Tue Mar  6 11:20:32 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 11:20:32 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Tue Mar  6 11:20:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Tue Mar  6 11:20:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Tue Mar  6 11:28:17 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar  6 11:28:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 11:28:17 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar  6 11:28:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 11:28:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 11:28:17 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar  6 11:28:17 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar  6 11:28:17 2012] Fit fullrun_mos1_xmm0502671101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar  6 11:44:30 2012] Spatial fit model total counts = 16062.300000, observed total counts = 15578.000000
[Tue Mar  6 11:44:30 2012] Offset between fit and detection position for source 2 = 0.299353 pixels
[Tue Mar  6 11:44:30 2012] 16332.190000 total counts/ 10439.500000 bgd. counts: snr = 57.673160
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.299353 pixels
  Position = (302.3, 278.4) = 15 39 37.82 -83 35 21.8
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source counts = 5892.7 +/- 127.8
  Background counts = 10439.5
  Rate = 0.3 +/- 0.007
[Tue Mar  6 11:44:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 11:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 11:44:30 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 11:44:30 2012] Source does appear to be extended
[Tue Mar  6 11:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 12:11:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 12:11:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 12:11:41 2012] Initial guess for spatial extent in simple fitting = 14.36"
[Tue Mar  6 12:11:41 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.969
[Tue Mar  6 12:11:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.36"
[Tue Mar  6 12:18:21 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar  6 12:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 12:18:21 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar  6 12:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 12:18:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 12:18:21 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar  6 12:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 12:18:21 2012] fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar  6 12:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 12:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502671101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 12:34:44 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Tue Mar  6 12:34:44 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 12:34:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 12:34:44 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 12:34:44 2012] Source does appear to be extended
[Tue Mar  6 12:34:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 01:06:54 2012] Counts = 5892.690000, rescaling region sizes by 2.000000
[Wed Mar  7 01:06:54 2012] XMMSAS src. selection expression = ellipse(26251.670200, 24168.395200, 1723.188050, 1723.188050, 0.000000, X, Y)
[Wed Mar  7 01:06:54 2012] Writing source region out to fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar  7 01:06:54 2012] Extracting stamp from image fullrun_mos1_xmm0502671101_pi300-10000_cl_sm2.00.img.gz, (203, 179) - (401, 377)
[Wed Mar  7 01:06:54 2012] XMMSAS bgd. selection expression = annulus(26251.670200, 24168.395200, 5743.960165, 11487.920331, X, Y) && !ellipse(26402.932953, 23216.969482, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 01:06:54 2012] Writing fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2.gif
[Wed Mar  7 01:07:03 2012] Mean detx,y = (33.81, -231.70) 
[Wed Mar  7 01:07:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 01:11:49 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 01:11:50 2012] Setting source spectrum file to fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar  7 01:11:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar  7 05:32:44 2012] Updating aperture counts using extracted products
[Wed Mar  7 05:32:44 2012] Error reading totcts from fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar  7 05:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 05:32:44 2012] Using photon index=1.80, rate=0.324, arf fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2.arf
[Wed Mar  7 05:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 05:32:44 2012] Updating source flux to 2.9e-12
[Wed Mar  7 05:33:00 2012] Reading fit data from xmm0502671101/analysis//spectral/fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Mar  7 05:33:00 2012] Spectral fit parameter nH value = 3.32658e+21
[Wed Mar  7 05:33:00 2012] Spectral fit parameter PhoIndex value = 2.49602
[Wed Mar  7 05:33:00 2012] Failed to get F(0.3-8.0) from xmm0502671101/analysis//spectral/fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 05:33:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 05:33:00 2012] Using Nh = 3.3e+21, photon index=2.50, rate=0.324, arf fullrun_mos1_xmm0502671101_pi300-10000_pass1_cl_src2.arf
[Wed Mar  7 05:33:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 05:33:00 2012] Updating source flux to 2.8e-12