[Thu Aug 30 00:30:58 2012] Detection parameters:
  Position = (283.1, 283.3) = 20 21 51.63 32 25 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 763.1 +/- 33.7
  Background counts = 25.9
  Rate = 0.07 +/- 0.003

[Thu Aug 30 00:30:58 2012] Off-axis axis estimate = 1.56'
[Thu Aug 30 00:55:51 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:55:51 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Aug 30 00:55:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Thu Aug 30 00:55:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Thu Aug 30 01:01:02 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 30 01:01:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_src1.csv
[Thu Aug 30 01:01:02 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 30 01:01:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_src1.csv
[Thu Aug 30 01:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 01:01:02 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 30 01:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 30 01:01:02 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 30 01:01:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 30 01:01:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502670601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 01:01:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.119944 pixels away
[Thu Aug 30 01:01:04 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 01:01:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 01:01:04 2012] Assessing source extent using major
[Thu Aug 30 01:01:04 2012] Source does appear to be extended
[Thu Aug 30 01:01:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 01:07:24 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 01:07:24 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Aug 30 01:07:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Thu Aug 30 01:07:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.21"
[Thu Aug 30 01:09:46 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 30 01:09:46 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 30 01:09:46 2012] Fit fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Aug 30 01:09:46 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 30 01:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Aug 30 01:09:46 2012] fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 30 01:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Aug 30 01:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502670601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 01:09:48 2012] Spatial fit model total counts = 751.572000, observed total counts = 696.000000
[Thu Aug 30 01:09:48 2012] Offset between fit and detection position for source 1 = 0.117854 pixels
[Thu Aug 30 01:09:48 2012] 754.049000 total counts/ 341.291000 bgd. counts: snr = 22.342568
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.117854 pixels
  Position = (283.1, 283.4) = 20 21 51.62 32 25 15.2
  Extent = 4.8 (4.3-5.5)" x 4.7 (4.2-5.2)", rotation angle = 49
  Source counts = 412.8 +/- 27.5
  Background counts = 341.3
  Rate = 0.04 +/- 0.003
[Thu Aug 30 01:09:48 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 01:09:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 01:09:48 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 01:09:48 2012] Source does appear to be extended
[Thu Aug 30 01:09:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.84
[Thu Aug 30 01:12:04 2012] XMMSAS src. selection expression = ellipse(24580.529660, 24610.195600, 290.012408, 279.314408, 48.926899, X, Y)
[Thu Aug 30 01:12:04 2012] Writing source region out to fullrun_mos2_xmm0502670601_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 30 01:12:04 2012] Extracting stamp from image fullrun_mos2_xmm0502670601_pi300-10000_cl_sm2.00.img.gz, (266, 267) - (300, 300)
[Thu Aug 30 01:12:04 2012] XMMSAS bgd. selection expression = annulus(24580.529660, 24610.195600, 483.354014, 966.708028, X, Y)
[Thu Aug 30 01:12:04 2012] Writing fullrun_mos2_xmm0502670601_pi300-10000_pass1_cl_src1.gif
[Thu Aug 30 01:12:06 2012] Mean detx,y = (69.25, -131.41) 
[Thu Aug 30 01:12:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 01:12:11 2012] grppha failed
[Thu Aug 30 01:12:11 2012] Setting source spectrum file to fullrun_mos2_xmm0502670601_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 30 01:12:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502670601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 30 01:12:31 2012] Updating aperture counts using extracted products
[Thu Aug 30 01:12:31 2012] Error reading totcts from fullrun_mos2_xmm0502670601_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 30 01:12:31 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 01:12:33 2012] Source 1 has no response, skipping
[Thu Aug 30 01:12:34 2012] xmm0502670601/analysis//spectral/fullrun_mos2_xmm0502670601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete