[Fri Nov 25 10:10:41 2011] Detection parameters:
  Position = (327.8, 315.6) = 8 12 28.87 -57 13 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.3 +/- 10.3
  Background counts = 19.9
  Rate = 0.05 +/- 0.01

[Fri Nov 25 10:10:42 2011] Off-axis axis estimate = 2.47'
[Fri Nov 25 10:12:51 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 10:12:51 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Nov 25 10:12:51 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Fri Nov 25 10:12:51 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.66"
[Fri Nov 25 13:01:10 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Nov 25 13:01:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src13.csv
[Fri Nov 25 13:01:10 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Nov 25 13:01:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src13.csv
[Fri Nov 25 13:01:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 13:01:11 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Nov 25 13:01:11 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Nov 25 13:01:11 2011] Fit fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Nov 25 14:54:53 2011] Warning, spatial fit 13 centroid is now closest to src. 7
[Fri Nov 25 14:54:53 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.592101 pixels away
[Fri Nov 25 14:54:53 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 14:54:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 14:54:53 2011] Assessing source extent using major
[Fri Nov 25 14:54:53 2011] Source does appear to be extended
[Fri Nov 25 14:54:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:54:53 2011] Source is confused with source 8
[Fri Nov 25 14:55:09 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:55:09 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Nov 25 14:55:09 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Fri Nov 25 14:55:09 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 7.66"
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src9.ximg exists
[Fri Nov 25 16:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src9.csv
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Nov 25 16:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src9.csv
[Fri Nov 25 16:14:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Nov 25 16:14:08 2011] Fit fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Nov 25 17:41:42 2011] Source 13 is offset by 6.051946 and 5.926129 pixels which is larger than
2 X fitted extent = 3.990276 x 3.990276, not incorporating fit results
[Fri Nov 25 17:41:42 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 17:41:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 17:41:42 2011] Assessing source extent using major
[Fri Nov 25 17:41:42 2011] Source does appear to be extended
[Fri Nov 25 17:41:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 17:41:49 2011] XMMSAS src. selection expression = ellipse(28472.305267, 27405.655212, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 17:41:49 2011] Writing source region out to fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src13_src.reg
[Fri Nov 25 17:41:49 2011] Extracting stamp from image fullrun_pn_xmm0502670301_pi300-10000_cl_sm2.00.img.gz, (290, 278) - (365, 353)
[Fri Nov 25 17:41:49 2011] XMMSAS bgd. selection expression = annulus(28472.305267, 27405.655212, 1087.500000, 2175.000000, X, Y) && !ellipse(27824.019000, 26014.220600, 739.816021, 739.816021, 0.000000, X, Y) && !ellipse(28529.340607, 26136.174194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.875702, 24936.552307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.092600, 26876.136000, 797.716823, 797.716823, 0.000000, X, Y) && !ellipse(28931.856323, 27102.304840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29034.846000, 25781.746000, 1203.448035, 1203.448035, 0.000000, X, Y) && !ellipse(27648.760315, 25024.378021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26855.888916, 27267.734406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26442.381378, 26568.200562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.004000, 26995.286000, 1317.672038, 1317.672038, 0.000000, X, Y) && !ellipse(26554.553711, 25964.916840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.664062, 25537.749176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.890289, 24728.578552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28013.946320, 24648.781647, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 17:41:49 2011] Writing fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src13.gif
[Fri Nov 25 17:45:15 2011] Mean detx,y = (-393.66, -1408.29) 
[Fri Nov 25 17:45:17 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:45:43 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:45:43 2011] Setting source spectrum file to fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Nov 25 17:45:43 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Nov 25 18:17:03 2011] Not generating rmf since there are only 48 counts
[Fri Nov 25 18:17:03 2011] rmf not generated due to insufficient counts
[Sat Nov 26 06:28:19 2011] Updating aperture counts using extracted products
[Sat Nov 26 06:28:19 2011] Error reading totcts from fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Nov 26 06:28:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 06:28:20 2011] Using photon index=1.80, rate=0.0463, arf fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src13.arf
[Sat Nov 26 06:28:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 06:28:20 2011] Updating source flux to 1.4e-13
[Sat Nov 26 06:29:42 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting