[Fri Nov 25 10:10:41 2011] Detection parameters:
  Position = (320.3, 299.1) = 8 12 32.92 -57 14 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.8 +/- 22.3
  Background counts = 20.9
  Rate = 0.2 +/- 0.02

[Fri Nov 25 10:10:42 2011] Off-axis axis estimate = 1.58'
[Fri Nov 25 10:12:51 2011] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 10:12:51 2011] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Nov 25 10:12:51 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Fri Nov 25 10:12:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Fri Nov 25 13:01:10 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 13:01:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 13:01:10 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 13:01:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 13:01:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 13:01:10 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 13:01:10 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 13:01:10 2011] Fit fullrun_pn_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 14:54:53 2011] Spatial fit model total counts = 1167.280000, observed total counts = 1169.000000
[Fri Nov 25 14:54:53 2011] Offset between fit and detection position for source 1 = 0.508938 pixels
[Fri Nov 25 14:54:53 2011] 1149.785000 total counts/ 1025.780000 bgd. counts: snr = 3.871793
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.508938 pixels
  Position = (320.4, 299.6) = 8 12 32.86 -57 14 35.7
  Extent = 9.2 (6.3-11.3)", rotation angle = 0
  Source counts = 124.0 +/- 33.9
  Background counts = 1025.8
  Rate = 0.08 +/- 0.02
[Fri Nov 25 14:54:53 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 14:54:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 14:54:53 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 14:54:53 2011] Source does appear to be extended
[Fri Nov 25 14:54:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:54:53 2011] Source is confused with source 7
[Fri Nov 25 14:55:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:55:09 2011] Initial guess for spatial extent in simple fitting = 9.25"
[Fri Nov 25 14:55:09 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.906
[Fri Nov 25 14:55:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.25"
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 16:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 16:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 16:14:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 16:14:08 2011] fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 16:14:08 2011] Fit fullrun_pn_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 17:41:42 2011] Warning, spatial fit 1 centroid is now closest to src. 22
[Fri Nov 25 17:41:42 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 17:41:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 17:41:42 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 17:41:42 2011] Source does appear to be extended
[Fri Nov 25 17:41:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 17:41:49 2011] XMMSAS src. selection expression = ellipse(27824.019000, 26014.220600, 554.862016, 554.862016, 0.000000, X, Y)
[Fri Nov 25 17:41:49 2011] Writing source region out to fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 17:41:49 2011] Extracting stamp from image fullrun_pn_xmm0502670301_pi300-10000_cl_sm2.00.img.gz, (288, 268) - (352, 331)
[Fri Nov 25 17:41:49 2011] XMMSAS bgd. selection expression = annulus(27824.019000, 26014.220600, 924.770027, 1849.540053, X, Y) && !ellipse(28529.340607, 26136.174194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.875702, 24936.552307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.092600, 26876.136000, 797.716823, 797.716823, 0.000000, X, Y) && !ellipse(28931.856323, 27102.304840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29034.846000, 25781.746000, 1203.448035, 1203.448035, 0.000000, X, Y) && !ellipse(27648.760315, 25024.378021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26855.888916, 27267.734406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.305267, 27405.655212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26442.381378, 26568.200562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.004000, 26995.286000, 1317.672038, 1317.672038, 0.000000, X, Y) && !ellipse(26554.553711, 25964.916840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.054077, 24337.657349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.664062, 25537.749176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.890289, 24728.578552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28013.946320, 24648.781647, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 17:41:49 2011] Writing fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 17:41:53 2011] Mean detx,y = (154.08, 4.21) 
[Fri Nov 25 17:41:55 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:42:08 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:42:08 2011] Setting source spectrum file to fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 17:42:08 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Nov 26 06:28:19 2011] Updating aperture counts using extracted products
[Sat Nov 26 06:28:19 2011] Error reading totcts from fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 06:28:19 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 06:28:19 2011] Using photon index=1.80, rate=0.0811, arf fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 06:28:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 06:28:19 2011] Updating source flux to 2.1e-13
[Sat Nov 26 06:29:42 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Nov 26 06:30:12 2011] Reading fit data from xmm0502670301/analysis//spectral/fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Nov 26 06:30:12 2011] Spectral fit parameter nH value = 2.92786e+21
[Sat Nov 26 06:30:12 2011] Spectral fit parameter PhoIndex value = 1.9684
[Sat Nov 26 06:30:12 2011] Failed to get F(0.3-8.0) from xmm0502670301/analysis//spectral/fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Nov 26 06:30:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 06:30:12 2011] Using Nh = 2.9e+21, photon index=1.97, rate=0.0811, arf fullrun_pn_xmm0502670301_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 06:30:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 06:30:12 2011] Updating source flux to 3e-13