[Fri Nov 25 10:11:09 2011] Detection parameters:
  Position = (324.4, 309.0) = 8 12 30.72 -57 13 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.3 +/- 13.8
  Background counts = 13.5
  Rate = 0.04 +/- 0.005

[Fri Nov 25 10:11:09 2011] Off-axis axis estimate = 2.03'
[Fri Nov 25 13:01:11 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 13:01:11 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Fri Nov 25 13:01:11 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Fri Nov 25 13:01:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Fri Nov 25 13:37:40 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Nov 25 13:37:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 13:37:40 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Nov 25 13:37:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 13:37:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 13:37:40 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Nov 25 13:37:40 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Nov 25 13:37:40 2011] Fit fullrun_mos1_xmm0502670301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Nov 25 14:54:56 2011] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Nov 25 14:54:56 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 14:54:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 14:54:56 2011] Assessing source extent using major
[Fri Nov 25 14:54:56 2011] Source does appear to be extended
[Fri Nov 25 14:54:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:14:09 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 16:14:09 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Fri Nov 25 16:14:09 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Fri Nov 25 16:14:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.44"
[Fri Nov 25 16:49:14 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Nov 25 16:49:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 16:49:14 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Nov 25 16:49:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 16:49:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:49:14 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Nov 25 16:49:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Nov 25 16:49:14 2011] fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Nov 25 16:49:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Nov 25 16:49:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502670301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 17:41:43 2011] Spatial fit model total counts = 456.249000, observed total counts = 507.000000
[Fri Nov 25 17:41:43 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Nov 25 17:41:43 2011] Source 1 is offset by 5.199038 and -3.854494 pixels which is larger than
2 X fitted extent = 1.604083 x 1.604083, not incorporating fit results
[Fri Nov 25 17:41:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 17:41:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 17:41:43 2011] Assessing source extent using major
[Fri Nov 25 17:41:43 2011] Source does appear to be extended
[Fri Nov 25 17:41:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 17:41:43 2011] Source is confused with source 2
[Fri Nov 25 18:24:40 2011] XMMSAS src. selection expression = ellipse(28171.376282, 26832.598999, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 18:24:40 2011] Writing source region out to fullrun_mos1_xmm0502670301_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 18:24:40 2011] Extracting stamp from image fullrun_mos1_xmm0502670301_pi300-10000_cl_sm2.00.img.gz, (287, 271) - (362, 346)
[Fri Nov 25 18:24:40 2011] XMMSAS bgd. selection expression = annulus(28171.376282, 26832.598999, 1087.500000, 2175.000000, X, Y) && !ellipse(27805.793560, 26058.940400, 1068.184031, 1068.184031, 0.000000, X, Y) && !ellipse(27137.930600, 25524.173400, 725.885621, 725.885621, 0.000000, X, Y) && !ellipse(27613.488800, 25996.719000, 2136.368061, 2136.368061, 0.000000, X, Y) && !ellipse(28888.786438, 25960.411255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.780000, 26003.308000, 1116.440032, 1116.440032, 0.000000, X, Y)
[Fri Nov 25 18:24:40 2011] Writing fullrun_mos1_xmm0502670301_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 18:25:05 2011] Mean detx,y = (712.44, -445.96) 
[Fri Nov 25 18:25:06 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 18:25:17 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 18:25:18 2011] Setting source spectrum file to fullrun_mos1_xmm0502670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 18:25:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502670301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 18:45:47 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 18:45:47 2011] rmf not generated due to insufficient counts
[Sat Nov 26 06:28:21 2011] Updating aperture counts using extracted products
[Sat Nov 26 06:28:21 2011] Error reading totcts from fullrun_mos1_xmm0502670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 06:28:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 06:28:21 2011] Using photon index=1.80, rate=0.0427, arf fullrun_mos1_xmm0502670301_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 06:28:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 06:28:21 2011] Updating source flux to 4.2e-13
[Sat Nov 26 06:28:24 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting