[Thu Nov 24 17:17:16 2011] Detection parameters:
  Position = (290.2, 277.6) = 6 36 56.31 -5 21 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1609.3 +/- 47.5
  Background counts = 11.2
  Rate = 0.1 +/- 0.003

[Thu Nov 24 17:17:16 2011] Off-axis axis estimate = 1.62'
[Thu Nov 24 17:24:49 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 17:24:49 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Nov 24 17:24:49 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Thu Nov 24 17:24:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Nov 24 17:35:27 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 17:35:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 17:35:27 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 17:35:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 17:35:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 17:35:27 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 17:35:27 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 17:35:27 2011] Fit fullrun_mos1_xmm0502670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 17:43:44 2011] Source 3 is offset by 6.893594 and -7.050973 pixels which is larger than
2 X fitted extent = 0.832193 x 0.832193, not incorporating fit results
[Thu Nov 24 17:43:44 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 17:43:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 17:43:44 2011] Assessing source extent using major
[Thu Nov 24 17:43:44 2011] Source does appear to be extended
[Thu Nov 24 17:43:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 17:49:00 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 17:49:00 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Nov 24 17:49:00 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Thu Nov 24 17:49:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.24"
[Thu Nov 24 18:00:56 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 18:00:56 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 18:00:56 2011] Fit fullrun_mos1_xmm0502670101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Nov 24 18:00:56 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 18:00:56 2011] fullrun_mos1_xmm0502670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 18:00:56 2011] Fit fullrun_mos1_xmm0502670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 18:09:21 2011] Source 3 is offset by -6.421487 and 6.264108 pixels which is larger than
2 X fitted extent = 0.832193 x 0.832193, not incorporating fit results
[Thu Nov 24 18:09:21 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 135.462674 pixels away
[Thu Nov 24 18:09:21 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 18:09:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 18:09:21 2011] Assessing source extent using major
[Thu Nov 24 18:09:21 2011] Source does appear to be extended
[Thu Nov 24 18:09:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 18:20:52 2011] Counts = 1609.276733, rescaling region sizes by 2.000000
[Thu Nov 24 18:20:52 2011] XMMSAS src. selection expression = ellipse(25202.036652, 24103.271362, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Nov 24 18:20:52 2011] Writing source region out to fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3_src.reg
[Thu Nov 24 18:20:52 2011] Extracting stamp from image fullrun_mos1_xmm0502670101_pi300-10000_cl_sm2.00.img.gz, (215, 203) - (365, 353)
[Thu Nov 24 18:20:52 2011] XMMSAS bgd. selection expression = annulus(25202.036652, 24103.271362, 4350.000000, 8700.000000, X, Y)
[Thu Nov 24 18:20:52 2011] Writing fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3.gif
[Thu Nov 24 18:20:54 2011] Mean detx,y = (251.43, -338.24) 
[Thu Nov 24 18:20:56 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 18:22:31 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 18:22:31 2011] Setting source spectrum file to fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 18:22:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Nov 24 18:24:18 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Nov 24 18:24:18 2011] rmf not generated due to insufficient counts
[Thu Nov 24 19:15:38 2011] Updating aperture counts using extracted products
[Thu Nov 24 19:15:38 2011] Error reading totcts from fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 19:15:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 19:15:38 2011] Using photon index=1.80, rate=0.112, arf fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3.arf
[Thu Nov 24 19:15:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 19:15:38 2011] Updating source flux to 9.9e-13
[Thu Nov 24 19:15:38 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Nov 24 19:15:39 2011] xmm0502670101/analysis//spectral/fullrun_mos1_xmm0502670101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete