[Fri Jun 22 10:46:28 2012] Detection parameters:
  Position = (209.8, 160.3) = 6 14 7.14 47 33 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.2 +/- 12.6
  Background counts = 39.7
  Rate = 0.001 +/- 0.0003

[Fri Jun 22 10:46:28 2012] Off-axis axis estimate = 11.90'
[Fri Jun 22 11:21:57 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:21:57 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Fri Jun 22 11:21:57 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.095
[Fri Jun 22 11:21:57 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.38"
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 22 11:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 22 11:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 22 11:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 22 11:35:33 2012] Fit fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 22 11:35:42 2012] Spatial fit model total counts = 283.982000, observed total counts = 274.000000
[Fri Jun 22 11:35:42 2012] Offset between fit and detection position for source 5 = 0.276212 pixels
[Fri Jun 22 11:35:42 2012] 284.929000 total counts/ 256.786000 bgd. counts: snr = 1.756243
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.276212 pixels
  Position = (209.7, 160.6) = 6 14 7.18 47 33 13.5
  Extent = 4.3 (3.1-7.6)", rotation angle = 0
  Source counts = 28.1 +/- 16.9
  Background counts = 256.8
  Rate = 0.0009 +/- 0.0005
[Fri Jun 22 11:35:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 11:35:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 11:35:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 11:35:42 2012] Source does appear to be extended
[Fri Jun 22 11:35:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 12:11:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 12:11:11 2012] Initial guess for spatial extent in simple fitting = 4.26"
[Fri Jun 22 12:11:11 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.028
[Fri Jun 22 12:11:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.26"
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 22 12:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src6.csv
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 22 12:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src6.csv
[Fri Jun 22 12:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 22 12:23:54 2012] Fit fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 22 12:24:03 2012] Spatial fit model total counts = 264.524000, observed total counts = 254.000000
[Fri Jun 22 12:24:03 2012] Offset between fit and detection position for source 5 = 0.043806 pixels
[Fri Jun 22 12:24:03 2012] 265.577400 total counts/ 239.323000 bgd. counts: snr = 1.697110
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.043806 pixels
  Position = (209.7, 160.6) = 6 14 7.17 47 33 13.7
  Extent = 4.0 (2.6-8.3)", rotation angle = 0
  Source counts = 26.3 +/- 16.3
  Background counts = 239.3
  Rate = 0.0008 +/- 0.0005
  Deleting source due to low Poisson probability